http://wiki.makerspacenanaimo.org/api.php?action=feedcontributions&user=Jordan&feedformat=atomMakerspace Nanaimo - User contributions [en]2024-03-29T12:28:14ZUser contributionsMediaWiki 1.35.0http://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1316Laser Cutter2022-02-23T18:15:22Z<p>Jordan: /* Usage Statistics */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: https://drive.google.com/file/d/15Tfq4kjRB6WccMUF4wRwK5mY2i_rJEvu/view?usp=sharing<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* MXL belt, 10mm (3/8") wide, 2mm (0.08" pitch) spacing, 2.5m+ length<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|-<br />
| December 5, 2020 || 1553:13:30 || 793:03:21 || 410:40:16 || 7602 || 506200 || 18015<br />
|-<br />
| February 15, 2021 || 1663:13:00 || 843:27:26 || 440:16:36 || 8371 || 537602 || 19318<br />
|-<br />
| February 20, 2022 || 2139:53:30 || 1067:44:24 || 563:42:18 || 11267 || 673982 || 24443<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
*2020-11-18 JP: X-axis belt worn<br />
**2020-11-28 JP: MXL-10mm, 3 meters belt ordered from [https://www.ebay.ca/itm/122577104887 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Tools&diff=1315Tools2022-01-31T18:47:58Z<p>Jordan: fixed syntax error breaking tables</p>
<hr />
<div>This is a (non-comprehensive) list of tools at Makerspace Nanaimo. This list will help us keep track of information about the tools and who donated/loaned it. '''All tools/resources must stay on the premises so that other members may use them.'''<br />
<br />
In addition to tools, Makerspace has some [[Larger_work_surfaces|tables and larger work surfaces]] available for members to work on projects and to use as meeting and collaboration spaces.<br />
<br />
== [[:Category:3D Fabrication|3D Fabrication]] ==<br />
<br />
'''Repetier 3D Printing Server: http://10.40.5.52:3344/'''<br />
<br />
[https://www.simplify3d.com/support/print-quality-troubleshooting/ Print Quality Troubleshooting Guide - Simplify3D]<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:PrintrbotSimpleMetal-Black.jpg|link=Printrbot Simple Metal|upright|150px]] || [[Printrbot Simple Metal|3D printers (QTY: 3)]] <br> 6″ x 6″ x 6″ <br>150mm x 150mm x 150mm <br> 1.75mm PLA || Printrbot Simple Metal <br> <br> [https://printrbot.com/project/simple-metal/ Manufacturer's Specs] || 110 || ? || Yes || Owned by Makerspace Nanaimo<br />
|-<br />
|}<br />
<br />
== [[:Category:Creative Arts|Creative Arts (Crafts)]] ==<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|link=Laser Cutter|upright|150px]] || [[Laser Cutter]] <br> (1000 mm x 600 mm) <br> [[Laser Cutter Materials]] || Reci 100W 1060 Laser Cutter || 220 || ? || Yes || ?<br />
|-<br />
| [[File:industrial_sewing_machine1.jpg|link=Industrial Sewing Machine|upright|150px]] || [[Industrial Sewing Machine]] <br> (Medium - Heavy Material) <br> (Max. Sewing Speed 2,000 spm) || Mason Sunstar KM-340 BL || 120 || ? || Yes || Owned by Makerspace Nanaimo<br />
<!--<br />
|-<br />
| [[File:SilhouetteCameo2.jpg|link=Vinyl Cutter|upright|150px]] || [[Vinyl Cutter]] <br> (12" wide) || Silhouette Cameo<br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1491 member]<br />
--><br />
|-<br />
| [[File:LabelWriter_400.jpg|link=Label Printer|upright|150px]] || [[Label Printer]] <br> (2.3" wide) || Dymo LabelWriter 400 <br> <br> [http://www.dymo.com/en-CA/labelwriter-400-label-printer Manufacturer's Specs] || 110 || ? || No || ?<br />
|-<br />
| [[File:Elekmaker Drawbot.jpg|link=EleksDraw Drawbot|upright|150px]] || [[Drawbot]] <br> (280mm x 200mm) || EleksMaker EleksDraw <br> XY Plotter Drawbot<br> <br> [http://wiki.eleksmaker.com/doku.php?id=eleksdraw Manufacturer Website] || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1336 member]<br />
|-<br />
| [[File:Brother_DCP7060D.jpg|link=Office Supplies|upright|150px]] || [[Office Supplies]] || various || 110 || ? || No || Owned by Makerspace<br />
|-<br />
|}<br />
<br />
== [[:Category:Electronics|Electronics]] ==<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:Electronics Workbench 20190221.jpg|link=Electronics Workbench|upright|150px]] || [[Electronics Workbench]]<br> || Collection || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
| [[File:PCB Engraving Machine.png|link=PCB Prototyping Machine|upright|150px]] || [[PCB Prototyping Machine]]<br>(60k RPM, 12"x10"x7/8") || AccurateCNC 350 <br> <br> [http://web.archive.org/web/20071230052021/http://www.accuratecnc.com:80/products.html Manufacturer's Specs] || 110 || ? || Yes || Donated by [http://www.inuktun.com Inuktun]<br />
|-<br />
| [[File:Reflow_oven.jpg|link=Reflow Oven|upright|150px]] || [[Reflow Oven]]<br>(specs) || DIY <br> <br> [https://hackaday.io/project/8543-reflow-oven Hackaday IO page] || 110 || ? || ? || Owned by [https://members.makerspacenanaimo.org/members/view/1159 member]<br />
|-<br />
| [[File:Soldering_iron.jpg|link=Hakko Soldering Iron|upright|150px]] || [[Hakko Soldering Iron]] (QTY:8) <br> 120° - 899°F (50° - 480°C) || Hakko FX-888D <br> <br> [https://www.hakkousa.com/products/soldering/hakko-fx-888d-digital-soldering-station-10143.html Manufacturer's Specs] || 110 || ? || No || Owned by Makerspace Nanaimo <br />
|-<br />
| [[File:Aoyue_852A.jpg|link=Hot Air Rework Station|upright|150px]] || [[Hot Air Rework Station]] || Aoyue 852A++ || 110 || ? || No || Owned by Makerspace Nanaimo <br />
|-<br />
|[[File:Oscilloscope.jpg|link=Oscilloscope|upright|150px]] || [[Oscilloscope]] (QTY:3) <br> (60 MHz, 2 channel) || Tektronix 2215 <br> <br> [http://www.testequipmentdepot.com/usedequipment/tektronix/oscilloscopes/tek2213&2215specs.htm Manufacturer's Specs] || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Rigol_1000Z.png|link=Rigol Digital Oscilloscope|upright|150px]] || [[Rigol Digital Oscilloscope]] <br> (50 MHz, 4 channel) || Rigol DS1054Z<br>[http://beyondmeasure.rigoltech.com/acton/attachment/1579/f-04cf/0/-/-/-/-/file.pdf Manufacturer's Specs] || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1499 member] <br />
|-<br />
|[[File:Function_generator.jpg|link=Function Generator|upright|150px]] || [[Function Generator]]<br> (3.0 Mhz) || IEC F34 <br> <br> [https://www.radiomuseum.org/r/interstate_f34_function_generator.html Manufacturer's Specs] || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Tougs_M102.jpg|link=Multimeters|upright|70px]] || [[Multimeters]] (QTY:2) || Tougs M102<br> Thsinde TH036-3<br> || 2x 1.5V || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Autotransformer.jpg|link=Autotransformer|upright|150px]] || [[Autotransformer]] <br> 120/140V, 5A, 0.7KVA || Staco 3PN501 <br> <br> (Manufacturer's Specs) || 110/140 || 5A || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Dual 40 V power supply.jpg|link=Dual 40 V power supply|upright|150px]] || [[Dual 40 V power supply]] (QTY:2) <br> (0-40VDC, 1A, 2 channel) || Lambda LPD-422A-FM <br> <br> (Manufacturer's Specs) || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:YaeTek_8014-B1.jpg|link=Single 30 V power supply|upright|150px]] || [[Single 30 V power supply]]<br> (0-30VDC, 5A, 1 channel) || YaeTek 8014-B1 || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|}<br />
<br />
== [[:Category:Metal Shop|Metal Shop]] ==<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:Metal_lathe.jpg|link=Metal Lathe|upright|150px]] || [[Metal Lathe]] <br> (1400 RPM, 12" x 36") || Shaoxing CQ6230 <br> (same as Grizzly G4003G) <br> <br> [http://www.grizzly.com/products/12-x-36-Gunsmithing-Lathe-with-Stand/G4003G Manufacturer's Specs] || 220 || ? || Yes || Donated by [http://www.vmacair.com VMAC]<br />
|-<br />
| [[File:Micro_lathe.jpg|link=Micro Lathe|upright|150px]] || [[Micro Lathe]] <br> (7000 RPM, 4.5" x 9.75") || Taig Micro Lathe <br> <br> [http://www.taigtools.com/mlathe.html Manufacturer's Specs] || 110 || ? || Yes || Donated by [https://members.makerspacenanaimo.org/members/view/1286 member]<br />
<br />
<!--<br />
|-<br />
| [[File:Milling_machine.jpg|link=Milling Machine|upright|150px]] || [[Milling Machine]] <br> (0-2500 RPM, 4" x 7-5/16") || Mill/Drill <br> <br> || 110 || ? || Yes || Donated by [https://members.makerspacenanaimo.org/members/view/1249 member]<br />
--><br />
<br />
|-<br />
| [[File:Power_hacksaw.jpg|link=Power Hacksaw|upright|150px]] || [[Power Hacksaw]] <br> (specs) || Jet <br> <br> Manufacturer's Specs || 110 || ? || Yes || ?<br />
|-<br />
| [[File:Metal_bandsaw.jpg|link=Metal Bandsaw|upright|150px]] || [[Metal Bandsaw]] <br> (specs) || Metal Bandsaw <br> <br> Manufacturer's Specs || 110 || ? || Yes || ?<br />
|-<br />
| [[File:Metal_drill_press.jpg|link=Metal Drill Press|upright|150px]] || [[Metal Drill Press]] <br> (specs) || Metal Drill Press <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|-<br />
| [[File:12_ton_shop_press.jpg|link=12 Ton Shop Press|upright|75px]] || [[12 Ton Shop Press]] <br> (specs) || 12 Ton Shop Press <br> <br> || N/A || N/A || No || Donated by [http://www.vmacair.com VMAC]<br />
|-<br />
| [[File:Metal_shear.png|link=Metal Shear|upright|150px]] || [[Metal Shear|Metal Shear, foot squaring]] <br> (51-1/4" cutting length, 16ga MAX.) || Tennsmith T52 <br> <br> [http://www.tennsmith.com/foot-squaring-shears.html Manufacturer's specs] || N/A || N/A || Yes || Long term loan<br />
|-<br />
| [[File:Metal_hand_brake.png|link=Metal Hand Brake|upright|150px]] || [[Metal Hand Brake]] <br> (48-1/4", 16ga MAX.) || Tennsmith U48-16 <br> <br> [http://www.tennsmith.com/bench-top-hand-brakes.html Manufacturer's specs] || N/A || N/A || Yes || Long term loan<br />
|-<br />
| [[File:Metal_notcher.jpg|link=Metal Notcher|upright|150px]] || [[Metal Notcher]] <br> (6" x 6" x 90 degrees, 16ga MAX.) || Roper Whitney PS-66 <br> <br> [https://www.roperwhitney.com/our-products/ps-66-notcher-with-high-speed-blades/ Manufacturer's specs]|| N/A || N/A || Yes || Long term loan<br />
|-<br />
| [[File:Metal_spot_welder.jpg|link=Metal Spot Welder|upright|150px]] || [[Metal Spot Welder]] <br> (45A) || Miller <br> <br> Manufacturer's specs|| N/A || N/A || Yes || Long term loan<br />
|-<br />
|}<br />
<br />
== [[:Category:Software|Software]] ==<br />
* [[List of software]]<br />
<br />
== [[:Category:Wood Shop|Wood Shop]] ==<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:CNC_Router_Render.png|link=CNC Router|upright|150px]] || [[CNC Router]] <br> (24k RPM, 4'x4'x7") || CNC Conversion Kit 4'x4'x7" <br> <br> [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html Manufacturer's Specs] || 110 & 220 || ? || Yes || Owned by Makerspace Nanaimo<br />
|-<br />
| [[File:Table_saw.jpg|link=Table Saw|upright|150px]] || [[Table Saw]] <br> (10", 2.5HP) || King <br> <br> KC-10KX/U50 || 220 || 9.6A || No || Owned by Makerspace Nanaimo<br />
|-<br />
| [[File:Panel_saw.jpg|link=Panel Saw|upright|150px]] || [[Panel Saw]] <br> (4' x 8' crosscut) || DIY || 110 || ? || No || Group Project<br />
|-<br />
| [[File:Bandsaw.jpg|link=Bandsaw|upright|150px]] || [[Bandsaw]] <br> (14") || King <br> <br> King KC-1401HD || 110 || ? || No || ?<br />
|-<br />
| [[File:Thickness_planer.jpg|link=Thickness Planer|upright|150px]] || [[Thickness Planer]] <br> (13" Two-Speed Finishing Planer) || Delta <br> <br> 22-580 || 110 || 15A || No || Donated<br />
|-<br />
| [[File:Miter_saw.jpg|link=Miter Saw|upright|150px]] || [[Miter saw]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1206 member]<br />
|-<br />
| [[File:Router_table.jpg|link=Router Table|upright|150px]] || [[Router Table]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1169 member]<br />
|-<br />
| [[File:Oscillating_spindle_sander.jpg|link=Oscillating Spindle Sander|upright|150px]] || [[Oscillating Spindle Sander]] <br> (specs) || Delta <br> <br> SA350K || 110 || ? || No || ?<br />
|-<br />
| [[File:Combination_sander.png|link=Combination Sander|upright|150px]] || [[Combination Sander]] (Belt & Disc)<br> (4"x36" belt, 6" disc) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|-<br />
| [[File:Wood_lathe.jpg|link=Wood Lathe|upright|150px]] || [[Wood Lathe]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|-<br />
| [[File:Jointer.jpg|link=Jointer|upright|150px]] || [[Jointer]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || <span style="color: red;">Currently out of commission, removed.</span><br />
|-<br />
| [[File:Drill_press.jpg|link=Drill Press|upright|150px]] || [[Drill Press]] <br> (10", 1/2" chuck) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1412 member]<br />
|-<br />
| [[File:Dust_collector.jpg|link=Dust Collector|upright|150px]] || [[Dust Collector]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 220 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1181 member]<br />
|-<br />
| [[File:Dust_filter.jpg|link=Dust Filter|upright|150px]] || [[Dust Filter]] <br> (specs) || Delta 50-875 <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|}<br />
<br />
[[Category:Nanaimo Makerspace]]<br />
[[Category:Tools]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=User:Jordan&diff=1309User:Jordan2022-01-06T03:03:08Z<p>Jordan: Blanked the page</p>
<hr />
<div></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router_Training&diff=1308CNC Router Training2022-01-06T03:02:18Z<p>Jordan: /* Test File */</p>
<hr />
<div>[[Category:CNC Router]]<br />
<br />
== Mach 3 Control Software ==<br />
*'''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
<br />
== Power UP / Power DOWN / Tool Change Procedures ==<br />
*[[CNC Router Procedures]]<br />
<br />
== Vectric VCarve Pro Software ==<br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
**[http://support.vectric.com/ Support Site - Training materials, FAQs, Forum, etc.]<br />
**[http://www.vectric.com/support/introduction-to-cnc.html Introduction to CNC]<br />
<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
<br />
*Here is a list of appropriate '''vector file formats: EPS, AI, PDF, DXF, DWG, SVG, SKP'''<br />
**http://support.vectric.com/aspire-questions/item/what-vector-file-formats-can-be-imported<br />
<br />
*Here is a basic video tutorial showing how to '''import a DXF file''' and using it to do some basic profile cutouts of a part: <br />
**http://support.vectric.com/tutorials/V9/selectedvideo.php?video_id=1<br />
<br />
*If you can, I would go through the top row of 3 tutorials (Wing Spar, Avalon Nameplate, Bulls Head) which will cover the '''most common cutting techniques (profile cutout, pocketing, and v-carving)'''.<br />
**http://support.vectric.com/tutorials/V9/?software=3&category=1&order=1<br />
<br />
*Vectric limits the saving of the gcode toolpaths to fully-licensed computers at the Makerspace (of which we get 5 seats, one of which is the CNC control computer) as the final step in their software. The only step after that is loading the gcode txt file into the CNC control software (Mach3) and running the machine. The post processor in Vectric will be "Mach2/3 Arcs (mm)." This is a video that covers some fitment details (like if you were cutting the rosette pocket to fit an existing rosette ring). Normally this is done with "cutter compensation" in other CAM software but Vectric doesn't do it that way. There is an "allowance" setting in the profile & pocket toolpaths that you have to adjust and repost the gcode for tweaking just the right fit. It might be useful for you. Link: https://www.youtube.com/watch?v=g9mOSnc_IHY<br />
<br />
*[https://release.vectric.com/free-projects-2018/ Free projects of the month] - [local files on makershare drive]<br />
<br />
== Test File ==<br />
{| class="wikitable"<br />
|-<br />
|[[File:Test_Domino.png|left|thumb|link=https://drive.google.com/open?id=1qzyCOrR-xBGdE24oWaAB8kM5YqrpL2dZ|Test Domino SVG]]<br />
|[[File:CNC_Test_Domino_Simulation.jpg|left|thumb|Simulation Render]]<br />
|-<br />
|'''[https://drive.google.com/open?id=1qzyCOrR-xBGdE24oWaAB8kM5YqrpL2dZ Download SVG]'''<br />
|<br />
|}<br />
<br />
<br />
<!-- Placeholder info<br />
== Auto-Z height probing ==<br />
*Script source: https://www.cncnutz.com/2018/02/installing-touch-off-plate-in-mach3.html<br />
*Probe hardware<br />
**https://www.amazon.ca/gp/product/B075GK7V79/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1<br />
**Thickness: 19.22mm <br />
--><br />
<br />
== Cutting Tools ==<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
*[[CNC Router Collets]]<br />
<br />
{| class="wikitable" style="text-align:left;"<br />
|+Cutting Tools<br />
! Description<br />
! Shank/Collet<br />
! Material<br />
! Flute #<br />
|- <br />
| [https://www.banggood.com/90-Degree-V-Groove-Bit-6mm-Shank-Woodworing-Router-Bit-CNC-Carbide-End-Mill-Cutter-p-1041108.html '''90 Degree V Groove''' Bit] <br />
| 6mm <br />
| Carbide-''tipped''<br />
| 2<br />
|-<br />
| [https://www.banggood.com/60-Degree-3D-CNC-Router-V-Groove-Bit-Woodworking-Parts-p-961516.html '''60 Degree V Groove''' Bit] <br />
| 6mm <br />
| Carbide-''tipped''<br />
| 2<br />
|-<br />
| [https://www.banggood.com/6mm-x-30mm-V-Groove-Bottom-Cleaning-Router-Bit-CNC-Woodworking-Tool-p-1021684.html '''30mm''' Bottom Cleaning/Facing Bit]<br />
| 6mm<br />
| Carbide-''tipped''<br />
| 2<br />
|-<br />
| [https://www.banggood.com/6mm-x-22mm-Router-CNC-V-Groove-Bottom-Cleaning-Bit-Milling-Cutter-p-981850.html '''22mm''' Bottom Cleaning/Facing Bit]<br />
| 6mm<br />
| Carbide-''tipped''<br />
| 2<br />
|-<br />
| [https://www.banggood.com/2-12mm-Solid-Carbide-End-Mill-2-Flute-Slot-Drills-234681012mm-End-Mill-Cutter-CNC-Tool-p-1108736.html '''6mm Square''' End Mill, ''Centre Cutting'']<br />
| 6mm<br />
| ''Solid'' Carbide<br />
| 2<br />
|-<br />
| [https://www.banggood.com/2-12mm-Solid-Carbide-End-Mill-2-Flute-Slot-Drills-234681012mm-End-Mill-Cutter-CNC-Tool-p-1108736.html '''3mm Square''' End Mill ''Centre Cutting'']<br />
| 4mm<br />
| ''Solid'' Carbide<br />
| 2<br />
|-<br />
| [https://www.banggood.com/10pcs-18-Inch-Shank-2-Flutes-Carbide-Ball-Nose-End-Mills-17mm-2-Flute-CNC-Cutting-Tool-p-1034603.html '''1/8" Ball Nose''' End Mill]<br />
| 1/8"<br />
| ''Solid'' Carbide<br />
| 2<br />
|-<br />
| [https://www.banggood.com/3_175mm-Single-Flute-End-Mill-Cutter-Carbide-CNC-Router-Bits-p-977185.html '''1/8" O-Flute''' End Mill]<br />
| 1/8"<br />
| ''Solid'' Carbide<br />
| 1<br />
|-<br />
| [https://www.banggood.com/6mm-Shank-2-Flutes-R0_5-Solid-Carbide-Taper-Ball-Nose-End-Mill-Cutter-p-1067643.html '''6mm R0.5 Taper Ball Nose''' End Mill]<br />
| 6mm<br />
| ''Solid'' Carbide<br />
| 2<br />
|}<br />
<br />
== Youtube Channels ==<br />
*[https://www.youtube.com/user/cncnutz/videos CNCnutz]<br />
*[https://www.youtube.com/user/legacywoodworking/videos Legacy Woodworking]<br />
*[https://www.youtube.com/user/Vectric/videos Vectric Ltd.]<br />
*[https://www.youtube.com/user/cncrouterparts/videos CNC Router Parts]<br />
*[https://www.youtube.com/user/Toolstoday/videos Toolstoday / Amana Tool]<br />
*[https://www.youtube.com/user/AXYZInternational/videos AXYZ International]<br />
*[https://www.youtube.com/user/CNCminiProjects/videos Design and Make CNC Projects]<br />
<br />
== Other Training Materials ==<br />
*[http://wiki.steamlabs.ca/wiki/index.php/CNC_Router Steam Labs WIKI - CNC Router]<br />
**[https://docs.google.com/presentation/d/1qwAxi8_vJ29uBMTqIlKPG96U1RboMFcJ0_H97IOVxJ8/edit?usp=sharing Full CNC training presentation]<br />
**http://wiki.steamlabs.ca/wiki/index.php/Feeds_and_Speeds</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Leadership_Team&diff=1305Leadership Team2021-12-08T17:36:25Z<p>Jordan: </p>
<hr />
<div>The leadership team handles all executive and administrative tasks for the space. This includes marketing, communication, membership management, treasury, etc. We welcome any members in good-standing to participate and take on higher-level responsibilities for the space.<br />
<br />
Contact with the leadership team can be made via email: leadership AT makerspacenanaimo DOT org<br />
<br />
Current board members (as of Nov. 30, 2021 AGM) are:<br />
* [https://members.makerspacenanaimo.org/members/view/1166 Keith B.]<br />
* [https://members.makerspacenanaimo.org/members/view/1336 Ron R.]<br />
* [https://members.makerspacenanaimo.org/members/view/1483 Rick H.]<br />
* [https://members.makerspacenanaimo.org/members/view/1667 Ken S.]<br />
* [https://members.makerspacenanaimo.org/members/view/1601 Yonas J.] (Treasurer)<br />
* [https://members.makerspacenanaimo.org/members/view/1302 Price C.]<br />
* [https://members.makerspacenanaimo.org/members/view/1674 Don B.]<br />
* [https://members.makerspacenanaimo.org/members/view/1669 Kenton K.]<br />
<br />
[[Category:Nanaimo Makerspace]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Vectric_VCarve_Pro_-_Makerspace_Edition&diff=1301Vectric VCarve Pro - Makerspace Edition2021-10-08T17:55:53Z<p>Jordan: /* How does the Makerspace Program work? */</p>
<hr />
<div>[[Category:CNC Router]]<br />
[[Category:Software]]<br />
<br />
== Overview ==<br />
VCarve Pro provides a powerful but intuitive software solution for cutting parts on a CNC Router. There are tools for 2D design and calculation of 2D and 2.5D toolpaths and along with the ability to import and toolpath a single 3D model (STL, OBJ, SKP etc.). There is also support to import multiple Vectric Clip Art 3D models (V3M) to create advanced 3D assemblies.<br />
<br />
https://www.vectric.com/products/vcarve-pro<br />
<br />
<br />
Vectric VCarve Pro is installed at the makerspace on the following computers:<br />
*3D printing (x3, Front Room)<br />
*CNC Router (x1, Wood Shop)<br />
*Laser Cutter (x1, Back Workshop)<br />
<br />
== [https://drive.google.com/file/d/1ADc8-6zWaNxuXKVnuY8Jg1yUyYNOPavm/view?usp=sharing How does the Makerspace Program work?] ==<br />
<br />
* [https://drive.google.com/file/d/1mCPf7NQzW7kz_dc9bJzfgMliKwuKvC6m/view?usp=sharing PDF Instructions]<br />
[[File:vectric_activation_screenshot.jpg]]<br />
<br />
[[File:Vcarve-how-it-works.png]]<br />
<br />
The Makerspace can install the specially licensed software on up to 5 PC’s, these MUST be connected to the internet. When a member opens a file which they have been working within a Makerspace Client Edition of the software on their own computer, VCarve Pro Maker Edition will contact a web server run by Vectric to get permission to open the file. When permission is received, the file will open as though it was written by any normal version of VCarve Pro; from there they will be able to save their toolpaths to run on the CNC at the Makerspace. <br />
To obtain a Makerspace Client Edition a member just needs to download the free [http://www.vectric.com/products/vcarve/trial.html Trial Edition of VCarve Pro] and activate it with a MakerspaceID code that can be generated from the Makerspace Edition installed at the main facility. Full details of this are available in the PDF document downloadable by clicking the button below. <br />
<br />
https://www.vectric.com/free-trial/vcarve-pro<br />
<br />
We are currently using VCarve Pro v11<br />
<br />
== MakerspaceID code ==<br />
<br />
# On '''HOME''' computer:<br />
## Start ''VCarve Pro''<br />
## Click on ''Help''<br />
## Click ''About VCarve Pro Makerspace''<br />
## Click on ''MakerSpace ID''<br />
## Paste in this code:<br/><s>V10<br/><pre>67AF8-ED48E-EC780-FAE64-4505E-F4130-48D4F</pre></s><br/>'''V11'''<br/><pre>BA195-9D29A-1CFB8-1B232-02C5C-69C9C-0B98A</pre><br />
## Restart Vcarve and start designing!<br/><br/><br />
# On '''MAKERSPACE''' computer:<br />
## Start ''VCarve Pro''<br />
## Open file that you created from your own computer (Test.CRV)<br />
## It will ask if you want license, click ''Yes''.<br />
## Continue working on your design or save toolpaths as GCode.<br />
<br />
== Project Files ==<br />
[https://release.vectric.com/makeastand/ CNC Router Parts Standing Desk] <!-- Download: https://drive.google.com/open?id=1gH79BbKb1SHLDpW9XXGirahokiV3g3zs --><br />
<br />
== Gadgets ==<br />
[https://gadgets.vectric.com/V9/library.html Vectric Gadgets Library] - Gadgets are small programs that add additional functionality to VCarve Pro and Aspire. They can be used to add new features to the software or automate common sequences of tasks.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Vectric_VCarve_Pro_-_Makerspace_Edition&diff=1300Vectric VCarve Pro - Makerspace Edition2021-10-07T03:40:36Z<p>Jordan: /* MakerspaceID code */ V11 change of Makerspace ID</p>
<hr />
<div>[[Category:CNC Router]]<br />
[[Category:Software]]<br />
<br />
== Overview ==<br />
VCarve Pro provides a powerful but intuitive software solution for cutting parts on a CNC Router. There are tools for 2D design and calculation of 2D and 2.5D toolpaths and along with the ability to import and toolpath a single 3D model (STL, OBJ, SKP etc.). There is also support to import multiple Vectric Clip Art 3D models (V3M) to create advanced 3D assemblies.<br />
<br />
https://www.vectric.com/products/vcarve-pro<br />
<br />
<br />
Vectric VCarve Pro is installed at the makerspace on the following computers:<br />
*3D printing (x3, Front Room)<br />
*CNC Router (x1, Wood Shop)<br />
*Laser Cutter (x1, Back Workshop)<br />
<br />
== [https://drive.google.com/file/d/1ADc8-6zWaNxuXKVnuY8Jg1yUyYNOPavm/view?usp=sharing How does the Makerspace Program work?] ==<br />
<br />
* [https://drive.google.com/file/d/1mCPf7NQzW7kz_dc9bJzfgMliKwuKvC6m/view?usp=sharing PDF Instructions]<br />
[[File:vectric_activation_screenshot.jpg]]<br />
<br />
[[File:Vcarve-how-it-works.png]]<br />
<br />
The Makerspace can install the specially licensed software on up to 5 PC’s, these MUST be connected to the internet. When a member opens a file which they have been working within a Makerspace Client Edition of the software on their own computer, VCarve Pro Maker Edition will contact a web server run by Vectric to get permission to open the file. When permission is received, the file will open as though it was written by any normal version of VCarve Pro; from there they will be able to save their toolpaths to run on the CNC at the Makerspace. <br />
To obtain a Makerspace Client Edition a member just needs to download the free [http://www.vectric.com/products/vcarve/trial.html Trial Edition of VCarve Pro] and activate it with a MakerspaceID code that can be generated from the Makerspace Edition installed at the main facility. Full details of this are available in the PDF document downloadable by clicking the button below. <br />
<br />
https://www.vectric.com/free-trial/vcarve-pro<br />
<br />
We are currently using VCarve Pro v10.5<br />
<br />
== MakerspaceID code ==<br />
<br />
# On '''HOME''' computer:<br />
## Start ''VCarve Pro''<br />
## Click on ''Help''<br />
## Click ''About VCarve Pro Makerspace''<br />
## Click on ''MakerSpace ID''<br />
## Paste in this code:<br/><s>V10<br/><pre>67AF8-ED48E-EC780-FAE64-4505E-F4130-48D4F</pre></s><br/>'''V11'''<br/><pre>BA195-9D29A-1CFB8-1B232-02C5C-69C9C-0B98A</pre><br />
## Restart Vcarve and start designing!<br/><br/><br />
# On '''MAKERSPACE''' computer:<br />
## Start ''VCarve Pro''<br />
## Open file that you created from your own computer (Test.CRV)<br />
## It will ask if you want license, click ''Yes''.<br />
## Continue working on your design or save toolpaths as GCode.<br />
<br />
== Project Files ==<br />
[https://release.vectric.com/makeastand/ CNC Router Parts Standing Desk] <!-- Download: https://drive.google.com/open?id=1gH79BbKb1SHLDpW9XXGirahokiV3g3zs --><br />
<br />
== Gadgets ==<br />
[https://gadgets.vectric.com/V9/library.html Vectric Gadgets Library] - Gadgets are small programs that add additional functionality to VCarve Pro and Aspire. They can be used to add new features to the software or automate common sequences of tasks.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Vectric_VCarve_Pro_-_Makerspace_Edition&diff=1287Vectric VCarve Pro - Makerspace Edition2021-04-22T18:40:26Z<p>Jordan: /* How does the Makerspace Program work? */</p>
<hr />
<div>[[Category:CNC Router]]<br />
[[Category:Software]]<br />
<br />
== Overview ==<br />
VCarve Pro provides a powerful but intuitive software solution for cutting parts on a CNC Router. There are tools for 2D design and calculation of 2D and 2.5D toolpaths and along with the ability to import and toolpath a single 3D model (STL, OBJ, SKP etc.). There is also support to import multiple Vectric Clip Art 3D models (V3M) to create advanced 3D assemblies.<br />
<br />
https://www.vectric.com/products/vcarve-pro<br />
<br />
<br />
Vectric VCarve Pro is installed at the makerspace on the following computers:<br />
*3D printing (x3, Front Room)<br />
*CNC Router (x1, Wood Shop)<br />
*Laser Cutter (x1, Back Workshop)<br />
<br />
== [https://drive.google.com/file/d/1ADc8-6zWaNxuXKVnuY8Jg1yUyYNOPavm/view?usp=sharing How does the Makerspace Program work?] ==<br />
<br />
* [https://drive.google.com/file/d/1mCPf7NQzW7kz_dc9bJzfgMliKwuKvC6m/view?usp=sharing PDF Instructions]<br />
[[File:vectric_activation_screenshot.jpg]]<br />
<br />
[[File:Vcarve-how-it-works.png]]<br />
<br />
The Makerspace can install the specially licensed software on up to 5 PC’s, these MUST be connected to the internet. When a member opens a file which they have been working within a Makerspace Client Edition of the software on their own computer, VCarve Pro Maker Edition will contact a web server run by Vectric to get permission to open the file. When permission is received, the file will open as though it was written by any normal version of VCarve Pro; from there they will be able to save their toolpaths to run on the CNC at the Makerspace. <br />
To obtain a Makerspace Client Edition a member just needs to download the free [http://www.vectric.com/products/vcarve/trial.html Trial Edition of VCarve Pro] and activate it with a MakerspaceID code that can be generated from the Makerspace Edition installed at the main facility. Full details of this are available in the PDF document downloadable by clicking the button below. <br />
<br />
https://www.vectric.com/free-trial/vcarve-pro<br />
<br />
We are currently using VCarve Pro v10.5<br />
<br />
== MakerspaceID code ==<br />
<br />
# On '''HOME''' computer:<br />
## Start ''VCarve Pro''<br />
## Click on ''Help''<br />
## Click ''About VCarve Pro Makerspace''<br />
## Click on ''MakerSpace ID''<br />
## Paste in this code:<br/><pre>67AF8-ED48E-EC780-FAE64-4505E-F4130-48D4F</pre><br />
## Restart Vcarve and start designing!<br/><br/><br />
# On '''MAKERSPACE''' computer:<br />
## Start ''VCarve Pro''<br />
## Open file that you created from your own computer (Test.CRV)<br />
## It will ask if you want license, click ''Yes''.<br />
## Continue working on your design or save toolpaths as GCode.<br />
<br />
== Project Files ==<br />
[https://release.vectric.com/makeastand/ CNC Router Parts Standing Desk] <!-- Download: https://drive.google.com/open?id=1gH79BbKb1SHLDpW9XXGirahokiV3g3zs --><br />
<br />
== Gadgets ==<br />
[https://gadgets.vectric.com/V9/library.html Vectric Gadgets Library] - Gadgets are small programs that add additional functionality to VCarve Pro and Aspire. They can be used to add new features to the software or automate common sequences of tasks.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=File:Vectric_activation_screenshot.jpg&diff=1286File:Vectric activation screenshot.jpg2021-04-22T18:40:07Z<p>Jordan: </p>
<hr />
<div></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1285Laser Cutter2021-04-10T16:59:53Z<p>Jordan: /* Machine specs */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: https://drive.google.com/file/d/15Tfq4kjRB6WccMUF4wRwK5mY2i_rJEvu/view?usp=sharing<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* MXL belt, 10mm (3/8") wide, 2mm (0.08" pitch) spacing, 2.5m+ length<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|-<br />
| December 5, 2020 || 1553:13:30 || 793:03:21 || 410:40:16 || 7602 || 506200 || 18015<br />
|-<br />
| February 15, 2021 || 1663:13:00 || 843:27:26 || 440:16:36 || 8371 || 537602 || 19318<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
*2020-11-18 JP: X-axis belt worn<br />
**2020-11-28 JP: MXL-10mm, 3 meters belt ordered from [https://www.ebay.ca/itm/122577104887 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1283CNC Router2021-02-16T19:54:45Z<p>Jordan: /* Maintenance Log */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
* '''[[CNC Router Procedures]]'''<br />
* '''[[CNC Router Training]]'''<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
<br />
*Additional details: '''[[CNC Router Hardware]]'''<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
**2020/11/16 - tubing, reservoir, float switch replaced<br />
*2020/08/29 - spindle reported not turning on<br />
** resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
*2020/12/01 KS - spoil board replaced<br />
** cam clamps implemented<br />
*2021/01/16 KB - ER11-1/8" collet missing<br />
**2021/01/16 JP - spare parts ordered; 2x ER11-1/8", 2x ER11-1/4" collets<br />
**2021/02/15 JP - replenished<br />
*2021/02/12 KS - X-axis motor coupler broken<br />
**2021/02/15 KS - replaced<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1282Laser Cutter2021-02-15T22:58:39Z<p>Jordan: /* Usage Statistics */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: http://en.rd-acs.com/Private/Files/a4d9f12fe9e32eb7.pdf<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* MXL belt, 10mm (3/8") wide, 2mm (0.08" pitch) spacing, 2.5m+ length<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|-<br />
| December 5, 2020 || 1553:13:30 || 793:03:21 || 410:40:16 || 7602 || 506200 || 18015<br />
|-<br />
| February 15, 2021 || 1663:13:00 || 843:27:26 || 440:16:36 || 8371 || 537602 || 19318<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
*2020-11-18 JP: X-axis belt worn<br />
**2020-11-28 JP: MXL-10mm, 3 meters belt ordered from [https://www.ebay.ca/itm/122577104887 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Vectric_VCarve_Pro_-_Makerspace_Edition&diff=1281Vectric VCarve Pro - Makerspace Edition2021-02-14T17:56:12Z<p>Jordan: /* How does the Makerspace Program work? */</p>
<hr />
<div>[[Category:CNC Router]]<br />
[[Category:Software]]<br />
<br />
== Overview ==<br />
VCarve Pro provides a powerful but intuitive software solution for cutting parts on a CNC Router. There are tools for 2D design and calculation of 2D and 2.5D toolpaths and along with the ability to import and toolpath a single 3D model (STL, OBJ, SKP etc.). There is also support to import multiple Vectric Clip Art 3D models (V3M) to create advanced 3D assemblies.<br />
<br />
https://www.vectric.com/products/vcarve-pro<br />
<br />
<br />
Vectric VCarve Pro is installed at the makerspace on the following computers:<br />
*3D printing (x3, Front Room)<br />
*CNC Router (x1, Wood Shop)<br />
*Laser Cutter (x1, Back Workshop)<br />
<br />
== [https://www.vectric.com/sites/default/files/Files/MakerspaceDocument.pdf How does the Makerspace Program work?] ==<br />
<br />
[[File:Vcarve-how-it-works.png]]<br />
<br />
The Makerspace can install the specially licensed software on up to 5 PC’s, these MUST be connected to the internet. When a member opens a file which they have been working within a Makerspace Client Edition of the software on their own computer, VCarve Pro Maker Edition will contact a web server run by Vectric to get permission to open the file. When permission is received, the file will open as though it was written by any normal version of VCarve Pro; from there they will be able to save their toolpaths to run on the CNC at the Makerspace. <br />
To obtain a Makerspace Client Edition a member just needs to download the free [http://www.vectric.com/products/vcarve/trial.html Trial Edition of VCarve Pro] and activate it with a MakerspaceID code that can be generated from the Makerspace Edition installed at the main facility. Full details of this are available in the PDF document downloadable by clicking the button below. <br />
<br />
https://www.vectric.com/free-trial/vcarve-pro<br />
<br />
We are currently using VCarve Pro v10.5<br />
<br />
== MakerspaceID code ==<br />
<br />
# On '''HOME''' computer:<br />
## Start ''VCarve Pro''<br />
## Click on ''Help''<br />
## Click ''About VCarve Pro Makerspace''<br />
## Click on ''MakerSpace ID''<br />
## Paste in this code:<br/><pre>67AF8-ED48E-EC780-FAE64-4505E-F4130-48D4F</pre><br />
## Restart Vcarve and start designing!<br/><br/><br />
# On '''MAKERSPACE''' computer:<br />
## Start ''VCarve Pro''<br />
## Open file that you created from your own computer (Test.CRV)<br />
## It will ask if you want license, click ''Yes''.<br />
## Continue working on your design or save toolpaths as GCode.<br />
<br />
== Project Files ==<br />
[https://release.vectric.com/makeastand/ CNC Router Parts Standing Desk] <!-- Download: https://drive.google.com/open?id=1gH79BbKb1SHLDpW9XXGirahokiV3g3zs --><br />
<br />
== Gadgets ==<br />
[https://gadgets.vectric.com/V9/library.html Vectric Gadgets Library] - Gadgets are small programs that add additional functionality to VCarve Pro and Aspire. They can be used to add new features to the software or automate common sequences of tasks.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Guidelines&diff=1280Guidelines2021-02-11T00:49:54Z<p>Jordan: /* Cancellation */</p>
<hr />
<div>==Code of Conduct==<br />
#All guests and members must follow the Code of Conduct.<br />
#Safety is important, if you are unsure of how to safely do something, don’t do it.<br />
#Don't merely respect each other; be excellent to each other.<br />
#*We are all here to make things and learn. Collaboration is important.<br />
#*When you break something, own up to it. If you have any doubt about fixing it, ask for help. Don't make someone feel bad for breaking things, help them understand what went wrong. You will not be asked to replace/repair equipment due to honest mistakes, we just want to know '''why''' something broke so we can prevent it in the future.<br />
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.<ref>This includes taking out the trash, wiping down tables, vacuuming/sweeping floors, returning tools to the proper place, etc.<br />
#*Don't be afraid to ask questions. Answer them kindly; eventually you'll have to ask for help too.<br />
#*Tools/resources must stay on the premises so that other members may use them.<ref>Removing tools/resources from the space without authorisation from the [[Leadership Team]] is theft.<br />
#Everyone must sign a liability waiver.<br />
#All members are expected to maintain a safe and clean environment at all times.<br />
#Don't catch fire, set others on fire, or set anything on fire which has not been designated or designed to be on fire.<br />
#Harmful behavior, harrassment, stalking, theft, hazing, and otherwise being the opposite of excellent is unacceptable.<br />
#It is the responsibility of each member to help enforce the Code of Conduct. If someone is violating the Code of Conduct politely explain to them why their behaviour is not acceptable. Egregious violations should be reported to the [[Leadership Team]].<br />
<br />
===Guests===<br />
#Guests can not inhabit the Nanaimo Makerspace without another keyed Member present.<br />
#If guests are using tools and workspace alongside you, we ask they make a honorarium donation of $5/visit.<br />
#Guests must sign a liability waiver immediately upon entering the space.<br />
#Guests are encouraged to become Members.<br />
#Members are responsible for their Guests and their actions.<br />
<br />
===Minors===<br />
#The Nanaimo Makerspace is not a day care. Due to safety and insurance we have the following restrictions around minors:<br />
#Ages 18 and under must be '''*accompanied closely*''' by Parent or Legal Guardian at all times and are not allowed to have keys to the space.<br />
#*'''*Accompanied closely*''' means visual range generally, and immediate reach when near dangerous tools.<br />
#*Ages 14-18 may use the space and tools under direct guardian supervision. The guardian must be a full member and must know how to use the tool in question. For example, a minor may not use the lathe if the guardian has not been approved to use the lathe.<br />
#*Ages under 14 may accompany a member, but may not use any tools. Please ask if you are unsure.<br />
#Parents/Legal Guardians are responsible for their children and their actions.<br />
#Minors under the age of 19 must have their liability form signed by a Parent or Legal Guardian.<br />
<br />
===Comments/Complaints===<br />
Please contact the [[Leadership Team]] with any comments or complaints that you have.<br />
<br />
===Non-Discrimination===<br />
Nanaimo Makerspace does not promote or discriminate against any person, population group, or organisation. These include, but are not limited to race, colour, religion, sex, gender expression, physical appearance, language, education background, national origin, age, disability, and veteran status.<br />
<br />
===Anti-Harassment===<br />
Harassment is prohibited and will not be tolerated. Any person who feels they <br />
have been the victim of harassment should ask the harasser to cease the <br />
behavior, if they feel safe doing so. Members or guests asked to stop any <br />
harassing behavior are expected to comply immediately. Harassment includes the <br />
following, without limitation:<br />
#Offensive comments related to race, religion, gender, gender identity and expression, sexual orientation, disability, or physical appearance<br />
#Gratuitous sexual or obscene images or behavior in spaces where not appropriate<br />
#Unwelcome physical contact or sexual attention without consent or after a request to stop<br />
#Threats or incitement of violence towards any individual, including encouraging a person to engage in self-harm<br />
#Deliberate intimidation by words, gestures, body language, or menacing behavior<br />
#Stalking<br />
#Harassing photography or recording, including logging online activity for harassment purposes<br />
#Continued one-on-one contact or communication after requests to cease<br />
#Deliberate "outing" of a sensitive aspect of a person’s identity without their consent<br />
#Deliberate misgendering. This includes deadnaming or persistently using a pronoun that does not correctly reflect a person's gender identity<br />
<br />
==Storage==<br />
*Please reference our storage tag guidelines here: [[Storage_Tags]]<br />
**The Nanaimo Makerspace is not a storage facility. Projects and materials that do not follow these rules, will be considered donations.<br />
*Firearms, gunpowder, primers, and assembled ammunition cannot be stored at the Makerspace.<br />
<br />
==Loaning of Tools & Equipment To The Makerspace==<br />
Members can generously provide tools or equipment for use in the space, either by donating them outright or by loaning them.<br />
<br />
When equipment is loaned, the following conditions apply:<br />
<br />
#All loaned equipment must be marked or labeled with the owner's name<br />
#The owner must contact the [[Leadership Team]] so that they can record the following information:<br />
##Name of owner<br />
##Equipment being loaned<br />
##Serial number if available<br />
##Terms or conditions of the loan<br />
#Equipment is loaned subject to the understanding that it is preferable for NMS to own their equipment, rather than borrow it. NMS may seek to buy equipment in order to replace loaned items, which are then returned.<br />
#Loaned items may be returned at any time, by request of the owner or as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.<br />
<br />
==Donations==<br />
<br />
See [[Donations]]<br />
<br />
==Cancellation==<br />
<br />
# Paypal subscription<br />
#* You can cancel your Paypal subscription through their recurring payments dashboard ([https://www.paypal.com/myaccount/autopay/ link]) at any time. <br />
# Other forms of payment (cash, single paypal transaction, e-transfer)<br />
#* These are non-recurring types of payment that do not require further action to cancel.<br />
# When your current membership credit runs out, your fob will automatically disable. When you want to come back in the future, just make a payment through the portal, and your fob will automatically re-enable.<br />
<br />
==Notes==<br />
These guidelines are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.<br />
<br />
[[Category:Nanaimo Makerspace]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router_Hardware&diff=1279CNC Router Hardware2021-01-22T00:30:12Z<p>Jordan: </p>
<hr />
<div>Details of the hardware used in our '''[[CNC Router]]'''<br />
<br />
*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.<br />
*6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. <br />
*1 x Set of nuts, bolts and washers.<br />
*Aluminum parts <br />
**Thickness 1/2 inches and 3/4 inches<br />
*[[:File:6060extrusion.jpg|Aluminum extrusion 60mm x 60mm]], [https://8020.net/13110.html 30-series slots]<br />
**X axis bridge 2x6060 mm (2.36" x 2.36") <br />
**Y axis Frame 6060 mm (2.36" x 2.36")<br />
*SPINDLE<br />
**24,000RPM (currently set to 12,000RPM)<br />
**'''[[CNC Router Collets|ER11 collets]]'''<br />
**'''[[1.5KW Water-cooled Spindle motor + VFD]]'''<br />
**Diameter: 80 mm x Length: 205 mm<br />
**Power: 1.5 KW Voltage: 220V<br />
**Water pump for spindle<br />
*CNC Driver Controller<br />
**4 x Digital Stepper driver: CCK5560 24V to 50V ([https://drive.google.com/file/d/1Hog2uWa73UYwGENFKdzGE3AcK_oTqoSV/view?usp=sharing manual], [https://web.archive.org/web/20190112233205/http://www.cncelectronicskit.com/ wiring details])<br />
**1 x Power supply: 600W 48V 12A <br />
**1 x C10 breakout board ([https://cnc4pc.com/c10-bi-directional-parallel-port-interface-card.html#dom-tab link])<br />
*Stepper Motor<br />
** Jinsanshi Motor 57HS112-3004A635-A24 [https://web.archive.org/web/20190318130818/https://www.jss-motor.com/product/nema23-57HS-2-phase-1.8%C2%B0-hybrid-stepper-motor.html]<br />
**4 x Stepper Motor 425 oz. In. <br />
**1.8° /200 Steps Per Rev.<br />
**3 Amps Current Per Phase<br />
**4-wire Bi-polar<br />
**1/4" shaft<br />
*Couplers<br />
**6.35mm (1/4") x 8mm, D25L30 helical<br />
*Limit Switches<br />
**[https://www.banggood.com/Wholesale-NPN-DC-6-36V-Inductive-Proximity-Sensor-Detection-Switch-p-41603.html NPN DC 6-36V Inductive Proximity Sensor Detection Switch]<br />
*Speed 4000mm/minute<br />
*The weight of Cnc router 300 pounds " 150kg "<br />
<br />
*[https://web.archive.org/web/20161107233549/http://www.cnc-milling-router.com/ Full Build Instructions with diagrams]<br />
*[https://web.archive.org/web/20161026225647/http://www.cncelectronicskit.com/ Wiring tutorial : wire and setup digital driver with C10 board, and power supply]<br />
*[http://www.bc-robotics.com/shop/4-channel-relay-breakout/ 4-Channel Relay Board]<br />
<br />
[[Category:CNC Router]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router_Hardware&diff=1278CNC Router Hardware2021-01-22T00:25:23Z<p>Jordan: </p>
<hr />
<div>Details of the hardware used in our '''[[CNC Router]]'''<br />
<br />
*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.<br />
*6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. <br />
*1 x Set of nuts, bolts and washers.<br />
*Aluminum parts <br />
**Thickness 1/2 inches and 3/4 inches<br />
*[[:File:6060extrusion.jpg|Aluminum extrusion 60mm x 60mm]], [https://8020.net/13110.html 30-series slots]<br />
**X axis bridge 2x6060 mm (2.36" x 2.36") <br />
**Y axis Frame 6060 mm (2.36" x 2.36")<br />
*SPINDLE<br />
**24,000RPM (currently set to 12,000RPM)<br />
**'''[[CNC Router Collets|ER11 collets]]'''<br />
**'''[[1.5KW Water-cooled Spindle motor + VFD]]'''<br />
**Diameter: 80 mm x Length: 205 mm<br />
**Power: 1.5 KW Voltage: 220V<br />
**Water pump for spindle<br />
*CNC Driver Controller<br />
**4 x Digital Stepper driver: CCK5560 24V to 50V ([http://www.leadshine.com/UploadFile/Down/DM556m.pdf manual], [https://web.archive.org/web/20190112233205/http://www.cncelectronicskit.com/ wiring details])<br />
**1 x Power supply: 600W 48V 12A <br />
**1 x C10 breakout board ([https://cnc4pc.com/c10-bi-directional-parallel-port-interface-card.html#dom-tab link])<br />
*Stepper Motor<br />
** Jinsanshi Motor 57HS112-3004A635-A24 [http://www.jss-motor.com/product/nema23-57HS-2-phase-1.8%C2%B0-hybrid-stepper-motor.html]<br />
**4 x Stepper Motor 425 oz. In. <br />
**1.8° /200 Steps Per Rev.<br />
**3 Amps Current Per Phase<br />
**4-wire Bi-polar<br />
**1/4" shaft<br />
*Couplers<br />
**6.35mm (1/4") x 8mm, D25L30 helical<br />
*Limit Switches<br />
**[https://www.banggood.com/Wholesale-NPN-DC-6-36V-Inductive-Proximity-Sensor-Detection-Switch-p-41603.html NPN DC 6-36V Inductive Proximity Sensor Detection Switch]<br />
*Speed 4000mm/minute<br />
*The weight of Cnc router 300 pounds " 150kg "<br />
<br />
*[https://web.archive.org/web/20161107233549/http://www.cnc-milling-router.com/ Full Build Instructions with diagrams]<br />
*[https://web.archive.org/web/20161026225647/http://www.cncelectronicskit.com/ Wiring tutorial : wire and setup digital driver with C10 board, and power supply]<br />
*[http://www.bc-robotics.com/shop/4-channel-relay-breakout/ 4-Channel Relay Board]<br />
<br />
[[Category:CNC Router]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Table_Saw&diff=1277Table Saw2021-01-21T22:26:29Z<p>Jordan: /* Maintenance */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
<br />
[[File:Table saw 2.jpg|300px]]<br />
<br />
== Info ==<br />
<br />
*Make: [https://www.kingcanada.com/en/ King]<br />
*Model: [https://www.kingcanada.com/en/products/new-products/table-saws/kc-10kxu50-10-cabinet-saw-with-50-dual-rip-fence-system KC-10KX/U50]<br />
*Description: 10" Cabinet Table Saw, 2.5HP, 230VAC<br />
**[http://files.kingcanada.com/catalog/products/servicemanualxm/KC-10KX_U30%20service%20manual.pdf Service Manual]<br />
**[http://files.kingcanada.com/catalog/products/instructionmanualxm/KC-10KX_U30%20manual-eng.pdf Instruction Manual]<br />
**[http://files.kingcanada.com/catalog/products/printed%20pdf%20EN/KC-10KX_U30-Eng.pdf Spec Sheet]<br />
<br />
== Usage ==<br />
<br />
=== Specific Safety Instructions for Cabinet Saws ===<br />
# '''ALWAYS USE A GUARD''' - Always use a guard, splitter and anti-kickback fingers on all “thrusawing” operations. Thru-sawing operations are those when the blade cuts completely through the workpiece as in ripping or crosscutting.<br />
# '''ALWAYS HOLD THE WORK''' - Always hold the work firmly against the miter gauge or fence.<br />
# '''ALWAYS USE A PUSH STICK''' - For ripping narrow stock. Refer to ripping applications in instruction manual where push sticks are covered in detail.<br />
# '''NEVER''' - Never perform any operations “free-hand” which means using your hands to support or guide the workpiece. Always use either the fence or the miter gauge to position and guide the workpiece.<br />
# '''NEVER''' - Never stand or have any part of your body in line with the path of the saw blade.<br />
# '''NEVER REACH BEHIND''' - Never reach behind or over the cutting tool with either hand for any reason.<br />
# '''MOVE THE RIP FENCE''' - Move the rip fence out of the way when crosscutting.<br />
# '''WHEN CUTTING MOULDINGS''' - Never run the stock between the fence and the moulding cutterhead. Refer to moulding applications in the accessory manual for details.<br />
# '''DIRECTION OF FEED''' - Feed work into the blade against the direction of rotation.<br />
# '''NEVER''' - Never use the fence as a cut-off gauge when you are crosscutting.<br />
# '''NEVER''' - Never attempt to free a stalled saw blade without first turning the saw OFF.<br />
# '''PROVIDE ADEQUATE SUPPORT''' - To the rear and sides of the table saw for wide or long workpieces.<br />
# '''AVOID KICKBACKS''' - Avoid kickbacks (work thrown back towards you) by keeping the blade sharp, by keeping the rip fence parallel to the saw blade, by keeping the splitter and anti-kickback fingers and guard in place and operating, by not releasing work before it is pushed all the way past the saw blade, and by not ripping work that is twisted or warped or does not have a straight edge to guide along the fence.<br />
# '''AVOID AWKWARD OPERATIONS''' - Avoid awkward operations and hand positions where a sudden slip could cause your hand to move into the spinning blade.<br />
<br />
== Training ==<br />
*training content placeholder<br />
<br />
== Maintenance ==<br />
*2020-01-22 JP: purchased new; owned by Makerspace Nanaimo<br />
*2021-01-18 TJ: blade arbor lock pin found broken<br />
**2021-01-20 KS/KK: replacement pin installed<br />
*2021-01-21 JP: 208V extension plug / wall receptacle has loose friction fit; suggest twist-lock replacement</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Table_Saw&diff=1276Table Saw2021-01-21T22:25:08Z<p>Jordan: /* Maintenance */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
<br />
[[File:Table saw 2.jpg|300px]]<br />
<br />
== Info ==<br />
<br />
*Make: [https://www.kingcanada.com/en/ King]<br />
*Model: [https://www.kingcanada.com/en/products/new-products/table-saws/kc-10kxu50-10-cabinet-saw-with-50-dual-rip-fence-system KC-10KX/U50]<br />
*Description: 10" Cabinet Table Saw, 2.5HP, 230VAC<br />
**[http://files.kingcanada.com/catalog/products/servicemanualxm/KC-10KX_U30%20service%20manual.pdf Service Manual]<br />
**[http://files.kingcanada.com/catalog/products/instructionmanualxm/KC-10KX_U30%20manual-eng.pdf Instruction Manual]<br />
**[http://files.kingcanada.com/catalog/products/printed%20pdf%20EN/KC-10KX_U30-Eng.pdf Spec Sheet]<br />
<br />
== Usage ==<br />
<br />
=== Specific Safety Instructions for Cabinet Saws ===<br />
# '''ALWAYS USE A GUARD''' - Always use a guard, splitter and anti-kickback fingers on all “thrusawing” operations. Thru-sawing operations are those when the blade cuts completely through the workpiece as in ripping or crosscutting.<br />
# '''ALWAYS HOLD THE WORK''' - Always hold the work firmly against the miter gauge or fence.<br />
# '''ALWAYS USE A PUSH STICK''' - For ripping narrow stock. Refer to ripping applications in instruction manual where push sticks are covered in detail.<br />
# '''NEVER''' - Never perform any operations “free-hand” which means using your hands to support or guide the workpiece. Always use either the fence or the miter gauge to position and guide the workpiece.<br />
# '''NEVER''' - Never stand or have any part of your body in line with the path of the saw blade.<br />
# '''NEVER REACH BEHIND''' - Never reach behind or over the cutting tool with either hand for any reason.<br />
# '''MOVE THE RIP FENCE''' - Move the rip fence out of the way when crosscutting.<br />
# '''WHEN CUTTING MOULDINGS''' - Never run the stock between the fence and the moulding cutterhead. Refer to moulding applications in the accessory manual for details.<br />
# '''DIRECTION OF FEED''' - Feed work into the blade against the direction of rotation.<br />
# '''NEVER''' - Never use the fence as a cut-off gauge when you are crosscutting.<br />
# '''NEVER''' - Never attempt to free a stalled saw blade without first turning the saw OFF.<br />
# '''PROVIDE ADEQUATE SUPPORT''' - To the rear and sides of the table saw for wide or long workpieces.<br />
# '''AVOID KICKBACKS''' - Avoid kickbacks (work thrown back towards you) by keeping the blade sharp, by keeping the rip fence parallel to the saw blade, by keeping the splitter and anti-kickback fingers and guard in place and operating, by not releasing work before it is pushed all the way past the saw blade, and by not ripping work that is twisted or warped or does not have a straight edge to guide along the fence.<br />
# '''AVOID AWKWARD OPERATIONS''' - Avoid awkward operations and hand positions where a sudden slip could cause your hand to move into the spinning blade.<br />
<br />
== Training ==<br />
*training content placeholder<br />
<br />
== Maintenance ==<br />
*2020-01-22 JP: purchased new; owned by Makerspace Nanaimo<br />
*2021-01-18 TJ: blade arbor lock pin found broken<br />
**2021-01-20 KS/KK: replacement pin installed<br />
*2021-01-21 JP: 208V plug/receptacle has loose friction fit; suggest twist-lock replacement</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Table_Saw&diff=1275Table Saw2021-01-21T22:19:59Z<p>Jordan: /* Maintenance */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
<br />
[[File:Table saw 2.jpg|300px]]<br />
<br />
== Info ==<br />
<br />
*Make: [https://www.kingcanada.com/en/ King]<br />
*Model: [https://www.kingcanada.com/en/products/new-products/table-saws/kc-10kxu50-10-cabinet-saw-with-50-dual-rip-fence-system KC-10KX/U50]<br />
*Description: 10" Cabinet Table Saw, 2.5HP, 230VAC<br />
**[http://files.kingcanada.com/catalog/products/servicemanualxm/KC-10KX_U30%20service%20manual.pdf Service Manual]<br />
**[http://files.kingcanada.com/catalog/products/instructionmanualxm/KC-10KX_U30%20manual-eng.pdf Instruction Manual]<br />
**[http://files.kingcanada.com/catalog/products/printed%20pdf%20EN/KC-10KX_U30-Eng.pdf Spec Sheet]<br />
<br />
== Usage ==<br />
<br />
=== Specific Safety Instructions for Cabinet Saws ===<br />
# '''ALWAYS USE A GUARD''' - Always use a guard, splitter and anti-kickback fingers on all “thrusawing” operations. Thru-sawing operations are those when the blade cuts completely through the workpiece as in ripping or crosscutting.<br />
# '''ALWAYS HOLD THE WORK''' - Always hold the work firmly against the miter gauge or fence.<br />
# '''ALWAYS USE A PUSH STICK''' - For ripping narrow stock. Refer to ripping applications in instruction manual where push sticks are covered in detail.<br />
# '''NEVER''' - Never perform any operations “free-hand” which means using your hands to support or guide the workpiece. Always use either the fence or the miter gauge to position and guide the workpiece.<br />
# '''NEVER''' - Never stand or have any part of your body in line with the path of the saw blade.<br />
# '''NEVER REACH BEHIND''' - Never reach behind or over the cutting tool with either hand for any reason.<br />
# '''MOVE THE RIP FENCE''' - Move the rip fence out of the way when crosscutting.<br />
# '''WHEN CUTTING MOULDINGS''' - Never run the stock between the fence and the moulding cutterhead. Refer to moulding applications in the accessory manual for details.<br />
# '''DIRECTION OF FEED''' - Feed work into the blade against the direction of rotation.<br />
# '''NEVER''' - Never use the fence as a cut-off gauge when you are crosscutting.<br />
# '''NEVER''' - Never attempt to free a stalled saw blade without first turning the saw OFF.<br />
# '''PROVIDE ADEQUATE SUPPORT''' - To the rear and sides of the table saw for wide or long workpieces.<br />
# '''AVOID KICKBACKS''' - Avoid kickbacks (work thrown back towards you) by keeping the blade sharp, by keeping the rip fence parallel to the saw blade, by keeping the splitter and anti-kickback fingers and guard in place and operating, by not releasing work before it is pushed all the way past the saw blade, and by not ripping work that is twisted or warped or does not have a straight edge to guide along the fence.<br />
# '''AVOID AWKWARD OPERATIONS''' - Avoid awkward operations and hand positions where a sudden slip could cause your hand to move into the spinning blade.<br />
<br />
== Training ==<br />
*training content placeholder<br />
<br />
== Maintenance ==<br />
*2020-01-22 : purchased new; owned by Makerspace Nanaimo<br />
*2021-01-18 : blade arbor lock pin found broken<br />
**2021-01-20 KS/KK : replacement pin installed</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Table_Saw&diff=1274Table Saw2021-01-21T22:16:25Z<p>Jordan: /* Specific Safety Instructions for Cabinet Saws */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
<br />
[[File:Table saw 2.jpg|300px]]<br />
<br />
== Info ==<br />
<br />
*Make: [https://www.kingcanada.com/en/ King]<br />
*Model: [https://www.kingcanada.com/en/products/new-products/table-saws/kc-10kxu50-10-cabinet-saw-with-50-dual-rip-fence-system KC-10KX/U50]<br />
*Description: 10" Cabinet Table Saw, 2.5HP, 230VAC<br />
**[http://files.kingcanada.com/catalog/products/servicemanualxm/KC-10KX_U30%20service%20manual.pdf Service Manual]<br />
**[http://files.kingcanada.com/catalog/products/instructionmanualxm/KC-10KX_U30%20manual-eng.pdf Instruction Manual]<br />
**[http://files.kingcanada.com/catalog/products/printed%20pdf%20EN/KC-10KX_U30-Eng.pdf Spec Sheet]<br />
<br />
== Usage ==<br />
<br />
=== Specific Safety Instructions for Cabinet Saws ===<br />
# '''ALWAYS USE A GUARD''' - Always use a guard, splitter and anti-kickback fingers on all “thrusawing” operations. Thru-sawing operations are those when the blade cuts completely through the workpiece as in ripping or crosscutting.<br />
# '''ALWAYS HOLD THE WORK''' - Always hold the work firmly against the miter gauge or fence.<br />
# '''ALWAYS USE A PUSH STICK''' - For ripping narrow stock. Refer to ripping applications in instruction manual where push sticks are covered in detail.<br />
# '''NEVER''' - Never perform any operations “free-hand” which means using your hands to support or guide the workpiece. Always use either the fence or the miter gauge to position and guide the workpiece.<br />
# '''NEVER''' - Never stand or have any part of your body in line with the path of the saw blade.<br />
# '''NEVER REACH BEHIND''' - Never reach behind or over the cutting tool with either hand for any reason.<br />
# '''MOVE THE RIP FENCE''' - Move the rip fence out of the way when crosscutting.<br />
# '''WHEN CUTTING MOULDINGS''' - Never run the stock between the fence and the moulding cutterhead. Refer to moulding applications in the accessory manual for details.<br />
# '''DIRECTION OF FEED''' - Feed work into the blade against the direction of rotation.<br />
# '''NEVER''' - Never use the fence as a cut-off gauge when you are crosscutting.<br />
# '''NEVER''' - Never attempt to free a stalled saw blade without first turning the saw OFF.<br />
# '''PROVIDE ADEQUATE SUPPORT''' - To the rear and sides of the table saw for wide or long workpieces.<br />
# '''AVOID KICKBACKS''' - Avoid kickbacks (work thrown back towards you) by keeping the blade sharp, by keeping the rip fence parallel to the saw blade, by keeping the splitter and anti-kickback fingers and guard in place and operating, by not releasing work before it is pushed all the way past the saw blade, and by not ripping work that is twisted or warped or does not have a straight edge to guide along the fence.<br />
# '''AVOID AWKWARD OPERATIONS''' - Avoid awkward operations and hand positions where a sudden slip could cause your hand to move into the spinning blade.<br />
<br />
== Training ==<br />
*training content placeholder<br />
<br />
== Maintenance ==<br />
*purchased new 2020-Jan-22, owned by Makerspace Nanaimo</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1273CNC Router2021-01-21T19:35:36Z<p>Jordan: /* Specifications */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
* '''[[CNC Router Procedures]]'''<br />
* '''[[CNC Router Training]]'''<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
<br />
*Additional details: '''[[CNC Router Hardware]]'''<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
**2020/11/16 - tubing, reservoir, float switch replaced<br />
*2020/08/29 - spindle reported not turning on<br />
** resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
*2020/12/01 KS - spoil board replaced<br />
** cam clamps implemented<br />
*2021/01/16 KB - ER11-1/8" collet missing<br />
**2021/01/16 JP - spare parts ordered; 2x ER11-1/8", 2x ER11-1/4" collets<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1272CNC Router2021-01-21T19:33:47Z<p>Jordan: </p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
* '''[[CNC Router Procedures]]'''<br />
* '''[[CNC Router Training]]'''<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
|}<br />
<br />
*Additional details: '''[[CNC Router Hardware]]'''<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
**2020/11/16 - tubing, reservoir, float switch replaced<br />
*2020/08/29 - spindle reported not turning on<br />
** resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
*2020/12/01 KS - spoil board replaced<br />
** cam clamps implemented<br />
*2021/01/16 KB - ER11-1/8" collet missing<br />
**2021/01/16 JP - spare parts ordered; 2x ER11-1/8", 2x ER11-1/4" collets<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1271CNC Router2021-01-21T19:29:00Z<p>Jordan: /* Maintenance Log */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
|}<br />
<br />
*Additional details: '''[[CNC Router Hardware]]'''<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
**2020/11/16 - tubing, reservoir, float switch replaced<br />
*2020/08/29 - spindle reported not turning on<br />
** resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
*2020/12/01 KS - spoil board replaced<br />
** cam clamps implemented<br />
*2021/01/16 KB - ER11-1/8" collet missing<br />
**2021/01/16 JP - spare parts ordered; 2x ER11-1/8", 2x ER11-1/4" collets<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1270CNC Router2021-01-21T19:28:06Z<p>Jordan: /* Maintenance Log */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
|}<br />
<br />
*Additional details: '''[[CNC Router Hardware]]'''<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
**2020/11/16 - tubing, reservoir, float switch replaced<br />
<s>*2020/08/29 - spindle reported not turning on</s> -resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
*2020/12/01 KS - spoil board replaced<br />
** cam clamps implemented<br />
*2021/01/16 KB - ER11-1/8" collet missing<br />
**2021/01/16 JP - spare parts ordered; 2x ER11-1/8", 2x ER11-1/4" collets<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1269CNC Router2021-01-21T19:19:10Z<p>Jordan: </p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
|}<br />
<br />
*Additional details: '''[[CNC Router Hardware]]'''<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
<s>*2020/08/29 - spindle reported not turning on</s> -resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router_Hardware&diff=1268CNC Router Hardware2021-01-21T19:17:21Z<p>Jordan: Created page with "*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end. *6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. *1 x Set o..."</p>
<hr />
<div>*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.<br />
*6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. <br />
*1 x Set of nuts, bolts and washers.<br />
*Aluminum parts <br />
**Thickness 1/2 inches and 3/4 inches<br />
*[[:File:6060extrusion.jpg|Aluminum extrusion 60mm x 60mm]], [https://8020.net/13110.html 30-series slots]<br />
**X axis bridge 2x6060 mm (2.36" x 2.36") <br />
**Y axis Frame 6060 mm (2.36" x 2.36")<br />
*SPINDLE<br />
**24,000RPM (currently set to 12,000RPM)<br />
**'''[[CNC Router Collets|ER11 collets]]'''<br />
**'''[[1.5KW Water-cooled Spindle motor + VFD]]'''<br />
**Diameter: 80 mm x Length: 205 mm<br />
**Power: 1.5 KW Voltage: 220V<br />
**Water pump for spindle<br />
*CNC Driver Controller<br />
**4 x Digital Stepper driver: CCK5560 24V to 50V ([http://www.leadshine.com/UploadFile/Down/DM556m.pdf manual], [https://web.archive.org/web/20190112233205/http://www.cncelectronicskit.com/ wiring details])<br />
**1 x Power supply: 600W 48V 12A <br />
**1 x C10 breakout board ([https://cnc4pc.com/c10-bi-directional-parallel-port-interface-card.html#dom-tab link])<br />
*Stepper Motor<br />
** Jinsanshi Motor 57HS112-3004A635-A24 [http://www.jss-motor.com/product/nema23-57HS-2-phase-1.8%C2%B0-hybrid-stepper-motor.html]<br />
**4 x Stepper Motor 425 oz. In. <br />
**1.8° /200 Steps Per Rev.<br />
**3 Amps Current Per Phase<br />
**4-wire Bi-polar<br />
**1/4" shaft<br />
*Couplers<br />
**6.35mm (1/4") x 8mm, D25L30 helical<br />
*Limit Switches<br />
**[https://www.banggood.com/Wholesale-NPN-DC-6-36V-Inductive-Proximity-Sensor-Detection-Switch-p-41603.html NPN DC 6-36V Inductive Proximity Sensor Detection Switch]<br />
*Speed 4000mm/minute<br />
*The weight of Cnc router 300 pounds " 150kg "<br />
<br />
*[https://web.archive.org/web/20161107233549/http://www.cnc-milling-router.com/ Full Build Instructions with diagrams]<br />
*[https://web.archive.org/web/20161026225647/http://www.cncelectronicskit.com/ Wiring tutorial : wire and setup digital driver with C10 board, and power supply]<br />
*[http://www.bc-robotics.com/shop/4-channel-relay-breakout/ 4-Channel Relay Board]<br />
<br />
[[Category:CNC Router]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1267CNC Router2021-01-21T19:16:46Z<p>Jordan: /* Specifications */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
**Z-axis travel 7"<br />
<br />
*Spindle<br />
**24,000RPM (currently set to 12,000RPM), 1.5kW (2HP)<br />
**'''[[CNC Router Collets|ER11 collets]]''', maximum 6mm or 1/4" diameter shanks<br />
|}<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
<s>*2020/08/29 - spindle reported not turning on</s> -resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1266CNC Router2021-01-20T18:57:01Z<p>Jordan: /* Specifications */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**Z-axis travel 7"<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.<br />
*6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. <br />
*1 x Set of nuts, bolts and washers.<br />
*Aluminum parts <br />
**Thickness 1/2 inches and 3/4 inches<br />
*[[:File:6060extrusion.jpg|Aluminum extrusion 60mm x 60mm]], [https://8020.net/13110.html 30-series slots]<br />
**X axis bridge 2x6060 mm (2.36" x 2.36") <br />
**Y axis Frame 6060 mm (2.36" x 2.36")<br />
*SPINDLE<br />
**24,000RPM (currently set to 12,000RPM)<br />
**'''[[CNC Router Collets|ER11 collets]]'''<br />
**'''[[1.5KW Water-cooled Spindle motor + VFD]]'''<br />
**Diameter: 80 mm x Length: 205 mm<br />
**Power: 1.5 KW Voltage: 220V<br />
**Water pump for spindle<br />
*CNC Driver Controller<br />
**4 x Digital Stepper driver: CCK5560 24V to 50V ([http://www.leadshine.com/UploadFile/Down/DM556m.pdf manual], [https://web.archive.org/web/20190112233205/http://www.cncelectronicskit.com/ wiring details])<br />
**1 x Power supply: 600W 48V 12A <br />
**1 x C10 breakout board ([https://cnc4pc.com/c10-bi-directional-parallel-port-interface-card.html#dom-tab link])<br />
*Stepper Motor<br />
** Jinsanshi Motor 57HS112-3004A635-A24 [http://www.jss-motor.com/product/nema23-57HS-2-phase-1.8%C2%B0-hybrid-stepper-motor.html]<br />
**4 x Stepper Motor 425 oz. In. <br />
**1.8° /200 Steps Per Rev.<br />
**3 Amps Current Per Phase<br />
**4-wire Bi-polar<br />
**1/4" shaft<br />
*Couplers<br />
**6.35mm (1/4") x 8mm, D25L30 helical<br />
*Limit Switches<br />
**[https://www.banggood.com/Wholesale-NPN-DC-6-36V-Inductive-Proximity-Sensor-Detection-Switch-p-41603.html NPN DC 6-36V Inductive Proximity Sensor Detection Switch]<br />
*Speed 40000mm/minute<br />
*The weight of Cnc router 300 pounds " 150kg "<br />
|}<br />
<br />
*[https://web.archive.org/web/20161107233549/http://www.cnc-milling-router.com/ Full Build Instructions with diagrams]<br />
*[https://web.archive.org/web/20161026225647/http://www.cncelectronicskit.com/ Wiring tutorial : wire and setup digital driver with C10 board, and power supply]<br />
*[http://www.bc-robotics.com/shop/4-channel-relay-breakout/ 4-Channel Relay Board]<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
<s>*2020/08/29 - spindle reported not turning on</s> -resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Vectric_VCarve_Pro_-_Makerspace_Edition&diff=1265Vectric VCarve Pro - Makerspace Edition2021-01-20T18:49:29Z<p>Jordan: /* Overview */</p>
<hr />
<div>[[Category:CNC Router]]<br />
[[Category:Software]]<br />
<br />
== Overview ==<br />
VCarve Pro provides a powerful but intuitive software solution for cutting parts on a CNC Router. There are tools for 2D design and calculation of 2D and 2.5D toolpaths and along with the ability to import and toolpath a single 3D model (STL, OBJ, SKP etc.). There is also support to import multiple Vectric Clip Art 3D models (V3M) to create advanced 3D assemblies.<br />
<br />
https://www.vectric.com/products/vcarve-pro<br />
<br />
<br />
Vectric VCarve Pro is installed at the makerspace on the following computers:<br />
*3D printing (x3, Front Room)<br />
*CNC Router (x1, Wood Shop)<br />
*Laser Cutter (x1, Back Workshop)<br />
<br />
== [https://www.vectric.com/sites/default/files/Files/MakerspaceDocument.pdf How does the Makerspace Program work?] ==<br />
<br />
[[File:Vcarve-how-it-works.png]]<br />
<br />
The Makerspace can install the specially licensed software on up to 5 PC’s, these MUST be connected to the internet. When a member opens a file which they have been working within a Makerspace Client Edition of the software on their own computer, VCarve Pro Maker Edition will contact a web server run by Vectric to get permission to open the file. When permission is received, the file will open as though it was written by any normal version of VCarve Pro; from there they will be able to save their toolpaths to run on the CNC at the Makerspace. <br />
To obtain a Makerspace Client Edition a member just needs to download the free [http://www.vectric.com/products/vcarve/trial.html Trial Edition of VCarve Pro] and activate it with a MakerspaceID code that can be generated from the Makerspace Edition installed at the main facility. Full details of this are available in the PDF document downloadable by clicking the button below. <br />
<br />
https://www.vectric.com/free-trial/vcarve-pro<br />
<br />
We are currently using VCarve Pro v10<br />
<br />
== MakerspaceID code ==<br />
<br />
# On '''HOME''' computer:<br />
## Start ''VCarve Pro''<br />
## Click on ''Help''<br />
## Click ''About VCarve Pro Makerspace''<br />
## Click on ''MakerSpace ID''<br />
## Paste in this code:<br/><pre>67AF8-ED48E-EC780-FAE64-4505E-F4130-48D4F</pre><br />
## Restart Vcarve and start designing!<br/><br/><br />
# On '''MAKERSPACE''' computer:<br />
## Start ''VCarve Pro''<br />
## Open file that you created from your own computer (Test.CRV)<br />
## It will ask if you want license, click ''Yes''.<br />
## Continue working on your design or save toolpaths as GCode.<br />
<br />
== Project Files ==<br />
[https://release.vectric.com/makeastand/ CNC Router Parts Standing Desk] <!-- Download: https://drive.google.com/open?id=1gH79BbKb1SHLDpW9XXGirahokiV3g3zs --><br />
<br />
== Gadgets ==<br />
[https://gadgets.vectric.com/V9/library.html Vectric Gadgets Library] - Gadgets are small programs that add additional functionality to VCarve Pro and Aspire. They can be used to add new features to the software or automate common sequences of tasks.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1264CNC Router2021-01-20T18:47:57Z<p>Jordan: </p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
* Payment for Instruction / Signoff / Maintenance - $50, '''https://makerspacenanaimo.org/cnc/'''<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**Z-axis travel 7"<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.<br />
*6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. <br />
*1 x Set of nuts, bolts and washers.<br />
*Aluminum parts <br />
**Thickness 1/2 inches and 3/4 inches<br />
*[[:File:6060extrusion.jpg|Aluminum extrusion 60mm x 60mm]], [https://8020.net/13110.html 30-series slots]<br />
**X axis bridge 2x6060 mm (2.36" x 2.36") <br />
**Y axis Frame 6060 mm (2.36" x 2.36")<br />
*SPINDLE<br />
**24,000RPM (currently set to 12,000RPM)<br />
**[[CNC Router Collets|ER11 collets]]<br />
**[[1.5KW Water-cooled Spindle motor + VFD]]<br />
**Diameter: 80 mm x Length: 205 mm<br />
**Power: 1.5 KW Voltage: 220V<br />
**Water pump for spindle<br />
*CNC Driver Controller<br />
**4 x Digital Stepper driver: CCK5560 24V to 50V ([http://www.leadshine.com/UploadFile/Down/DM556m.pdf manual], [https://web.archive.org/web/20190112233205/http://www.cncelectronicskit.com/ wiring details])<br />
**1 x Power supply: 600W 48V 12A <br />
**1 x C10 breakout board ([https://cnc4pc.com/c10-bi-directional-parallel-port-interface-card.html#dom-tab link])<br />
*Stepper Motor<br />
** Jinsanshi Motor 57HS112-3004A635-A24 [http://www.jss-motor.com/product/nema23-57HS-2-phase-1.8%C2%B0-hybrid-stepper-motor.html]<br />
**4 x Stepper Motor 425 oz. In. <br />
**1.8° /200 Steps Per Rev.<br />
**3 Amps Current Per Phase<br />
**4-wire Bi-polar<br />
**1/4" shaft<br />
*Couplers<br />
**6.35mm (1/4") x 8mm, D25L30 helical<br />
*Limit Switches<br />
**[https://www.banggood.com/Wholesale-NPN-DC-6-36V-Inductive-Proximity-Sensor-Detection-Switch-p-41603.html NPN DC 6-36V Inductive Proximity Sensor Detection Switch]<br />
*Speed 40000mm/minute<br />
*The weight of Cnc router 300 pounds " 150kg "<br />
|}<br />
<br />
*[https://web.archive.org/web/20161107233549/http://www.cnc-milling-router.com/ Full Build Instructions with diagrams]<br />
*[https://web.archive.org/web/20161026225647/http://www.cncelectronicskit.com/ Wiring tutorial : wire and setup digital driver with C10 board, and power supply]<br />
*[http://www.bc-robotics.com/shop/4-channel-relay-breakout/ 4-Channel Relay Board]<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
<s>*2020/08/29 - spindle reported not turning on</s> -resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Dust_Collector&diff=1263Dust Collector2021-01-19T17:21:07Z<p>Jordan: </p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[File:Dust_collector.jpg|upright|150px]]<br />
<br />
== Info ==<br />
*Make: [https://www.kingcanada.com/en/ King] ??<br />
*Model: [https://www.kingcanada.com/en/products/woodworking/dust-collectors-cyclone-dust-collectors/kc-4045c-3-hp-2280-cfm-dust-collector KC-4045C] ??<br />
*Specs: 3HP, 220V, 2280CFM ??<br />
*Owner: [https://members.makerspacenanaimo.org/members/view/1181 member]<br />
<br />
== Replacement Bags ==<br />
*Replacements bags available from [http://www.midlandtools.ca/ Midland Tools (local)]<br />
**P/N: [https://www.kingcanada.com/en/products/accessories/dust-collectors---wood/kdcb-5-5-pc-see-through-plastic-bottom-dust-bag-kit KDCB-5] ??<br />
***Diameter: ??<br />
***Height: ??</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter_Users&diff=1262Laser Cutter Users2020-12-21T23:34:30Z<p>Jordan: Created page with "A list of trained and/or paid laser cutter users is maintained locally at: *http://10.40.5.12/laser/ Category:Laser"</p>
<hr />
<div>A list of trained and/or paid laser cutter users is maintained locally at:<br />
<br />
*http://10.40.5.12/laser/<br />
<br />
[[Category:Laser]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=CNC_Router&diff=1260CNC Router2020-12-18T17:21:07Z<p>Jordan: /* Approved Users */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Wood Shop]]<br />
[[Category:CNC Router]]<br />
<br />
[[File:CNC_Router_Render.png|upright|150px]]<br />
[[File:Cncrouter1.jpg|upright|150px]]<br />
<br />
==Overview==<br />
<br />
* '''Make:''' [http://www.cncconversionkit.com CNC Conversion Kit]<br />
* '''Model:''' [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html 4'x4'x7"]<br />
* '''Control Software:''' [http://www.machsupport.com Mach3] [ftp://anonymous:guest@ftp.machsupport.com/Mach3/Mach3Version3.043.062.exe Version 3.043.062] <br />
* '''CAM Software:''' [[Vectric VCarve Pro - Makerspace Edition]]<br />
<br />
==Learning==<br />
<br />
* '''[[CNC Router Training]]''' wiki page<br />
* [https://drive.google.com/open?id=1kRRZWj0-54-2yicxOyM2lBaimGGesOEu Vectric - Intro to CNC] (PDF, 3.5MB)<br />
* [https://drive.google.com/open?id=10V6KoBxzMxOjbddPvr84rL4TQKctrsxD Router Bit Basics for CNC] (PDF, 3MB)<br />
<br />
==Specifications==<br />
<br />
{|<br />
*Work area dimensions<br />
**Z-axis travel 7"<br />
**X-axis travel 48"<br />
**Y-axis travel 48"<br />
*4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.<br />
*6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z. <br />
*1 x Set of nuts, bolts and washers.<br />
*Aluminum parts <br />
**Thickness 1/2 inches and 3/4 inches<br />
*[[:File:6060extrusion.jpg|Aluminum extrusion 60mm x 60mm]], [https://8020.net/13110.html 30-series slots]<br />
**X axis bridge 2x6060 mm (2.36" x 2.36") <br />
**Y axis Frame 6060 mm (2.36" x 2.36")<br />
*SPINDLE<br />
**24,000RPM (currently set to 12,000RPM)<br />
**[[CNC Router Collets|ER11 collets]]<br />
**[[1.5KW Water-cooled Spindle motor + VFD]]<br />
**Diameter: 80 mm x Length: 205 mm<br />
**Power: 1.5 KW Voltage: 220V<br />
**Water pump for spindle<br />
*CNC Driver Controller<br />
**4 x Digital Stepper driver: CCK5560 24V to 50V ([http://www.leadshine.com/UploadFile/Down/DM556m.pdf manual], [https://web.archive.org/web/20190112233205/http://www.cncelectronicskit.com/ wiring details])<br />
**1 x Power supply: 600W 48V 12A <br />
**1 x C10 breakout board ([https://cnc4pc.com/c10-bi-directional-parallel-port-interface-card.html#dom-tab link])<br />
*Stepper Motor<br />
** Jinsanshi Motor 57HS112-3004A635-A24 [http://www.jss-motor.com/product/nema23-57HS-2-phase-1.8%C2%B0-hybrid-stepper-motor.html]<br />
**4 x Stepper Motor 425 oz. In. <br />
**1.8° /200 Steps Per Rev.<br />
**3 Amps Current Per Phase<br />
**4-wire Bi-polar<br />
**1/4" shaft<br />
*Couplers<br />
**6.35mm (1/4") x 8mm, D25L30 helical<br />
*Limit Switches<br />
**[https://www.banggood.com/Wholesale-NPN-DC-6-36V-Inductive-Proximity-Sensor-Detection-Switch-p-41603.html NPN DC 6-36V Inductive Proximity Sensor Detection Switch]<br />
*Speed 40000mm/minute<br />
*The weight of Cnc router 300 pounds " 150kg "<br />
|}<br />
<br />
*[https://web.archive.org/web/20161107233549/http://www.cnc-milling-router.com/ Full Build Instructions with diagrams]<br />
*[https://web.archive.org/web/20161026225647/http://www.cncelectronicskit.com/ Wiring tutorial : wire and setup digital driver with C10 board, and power supply]<br />
*[http://www.bc-robotics.com/shop/4-channel-relay-breakout/ 4-Channel Relay Board]<br />
<br />
==Maintenance Log==<br />
*E-stop switch failed; unreliable contacts<br />
**2018/09/02 - replaced with premium Sprecher & Schuh<br />
*X-axis stepper coupler failed<br />
**2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style<br />
*Z-axis found slipping/losing position<br />
**2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style<br />
*2019/05/xx - X-- & X++ limit switches moved outboard<br />
**collision possible between gantry riser brackets and z-axis now '''--REQUIRES RESOLUTION'''<br />
*2019/08/xx - X-axis coupler found spinning on ballscrew end<br />
**one set screw found missing, re-tightened remaining set screw<br />
*2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional<br />
**2019/09/14 - replaced proximity sensor [https://www.bc-robotics.com/shop/inductive-proximity-sensor/]<br />
*2020/03/05 - Spindle VFD fault "EoCn" - overcurrent on longer-running job (30 mins?) - Mark<br />
** unresolved<br />
*2020/03/11 - some features of Mach3 not functioning correctly<br />
** STEP JOG mode non-responsive; breaks Mach3; requires restarting program<br />
** MDI input non-responsive<br />
** Single-block mode ignored<br />
* 2020/03/13 JP - spare parts ordered<br />
** 2x ER11-A collet nuts<br />
** 1x ER11-1/8", 1x ER11-1/4" collets<br />
*2020/03/16 - spindle water coolant reported not flowing<br />
<s>*2020/08/29 - spindle reported not turning on</s> -resolved; likely VFD overcurrent error; probably cleared by power cycle.<br />
<br />
==Approved Users==<br />
(this is a list of users that have been signed-off on using the machine)<br />
*Jordan P.<br />
*Tim R.<br />
*Mark S.<br />
*Bill W.<br />
*Jamie M.<br />
*Owen H.<br />
*Evan Su.<br />
*Evan Sm.<br />
*Keith B.<br />
*David S.<br />
*Nick H.<br />
*Steven K.<br />
*Rylan R.<br />
*Simon T.<br />
*Ken S.<br />
*Kent K.</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1259Laser Cutter2020-12-06T19:33:30Z<p>Jordan: /* Usage Statistics */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: http://en.rd-acs.com/Private/Files/a4d9f12fe9e32eb7.pdf<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* MXL belt, 10mm (3/8") wide, 2mm (0.08" pitch) spacing, 2.5m+ length<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|-<br />
| December 5, 2020 || 1553:13:30 || 793:03:21 || 410:40:16 || 7602 || 506200 || 18015<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
*2020-11-18 JP: X-axis belt worn<br />
**2020-11-28 JP: MXL-10mm, 3 meters belt ordered from [https://www.ebay.ca/itm/122577104887 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1258Laser Cutter2020-11-28T19:26:46Z<p>Jordan: /* Maintenance Log */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: http://en.rd-acs.com/Private/Files/a4d9f12fe9e32eb7.pdf<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* MXL belt, 10mm (3/8") wide, 2mm (0.08" pitch) spacing, 2.5m+ length<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
*2020-11-18 JP: X-axis belt worn<br />
**2020-11-28 JP: MXL-10mm, 3 meters belt ordered from [https://www.ebay.ca/itm/122577104887 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1257Laser Cutter2020-11-28T19:24:17Z<p>Jordan: /* Machine specs */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: http://en.rd-acs.com/Private/Files/a4d9f12fe9e32eb7.pdf<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* MXL belt, 10mm (3/8") wide, 2mm (0.08" pitch) spacing, 2.5m+ length<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1256Laser Cutter2020-11-28T19:13:37Z<p>Jordan: /* Usage Statistics */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: http://en.rd-acs.com/Private/Files/a4d9f12fe9e32eb7.pdf<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|-<br />
| November 28, 2020 || 1525:53:00 || 775:36:24 || 400:34:28 || 7505 || 494034 || 17718<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Leadership_Team&diff=1255Leadership Team2020-11-25T03:41:11Z<p>Jordan: </p>
<hr />
<div>The leadership team handles all executive and administrative tasks for the space. This includes marketing, communication, membership management, treasury, etc. We welcome any members in good-standing to participate and take on higher-level responsibilities for the space.<br />
<br />
Contact with the leadership team can be made via email: leadership AT makerspacenanaimo DOT org<br />
<br />
Current board members (as of Nov 2020 AGM) are:<br />
* Jordan P.<br />
* Keith B.<br />
* Ron R.<br />
* Rick H.<br />
* Chris G.<br />
* Ken S.<br />
<br />
[[Category:Nanaimo Makerspace]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Guidelines&diff=1254Guidelines2020-11-14T17:22:56Z<p>Jordan: </p>
<hr />
<div>==Code of Conduct==<br />
#All guests and members must follow the Code of Conduct.<br />
#Safety is important, if you are unsure of how to safely do something, don’t do it.<br />
#Don't merely respect each other; be excellent to each other.<br />
#*We are all here to make things and learn. Collaboration is important.<br />
#*When you break something, own up to it. If you have any doubt about fixing it, ask for help. Don't make someone feel bad for breaking things, help them understand what went wrong. You will not be asked to replace/repair equipment due to honest mistakes, we just want to know '''why''' something broke so we can prevent it in the future.<br />
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.<ref>This includes taking out the trash, wiping down tables, vacuuming/sweeping floors, returning tools to the proper place, etc.<br />
#*Don't be afraid to ask questions. Answer them kindly; eventually you'll have to ask for help too.<br />
#*Tools/resources must stay on the premises so that other members may use them.<ref>Removing tools/resources from the space without authorisation from the [[Leadership Team]] is theft.<br />
#Everyone must sign a liability waiver.<br />
#All members are expected to maintain a safe and clean environment at all times.<br />
#Don't catch fire, set others on fire, or set anything on fire which has not been designated or designed to be on fire.<br />
#Harmful behavior, harrassment, stalking, theft, hazing, and otherwise being the opposite of excellent is unacceptable.<br />
#It is the responsibility of each member to help enforce the Code of Conduct. If someone is violating the Code of Conduct politely explain to them why their behaviour is not acceptable. Egregious violations should be reported to the [[Leadership Team]].<br />
<br />
===Guests===<br />
#Guests can not inhabit the Nanaimo Makerspace without another keyed Member present.<br />
#If guests are using tools and workspace alongside you, we ask they make a honorarium donation of $5/visit.<br />
#Guests must sign a liability waiver immediately upon entering the space.<br />
#Guests are encouraged to become Members.<br />
#Members are responsible for their Guests and their actions.<br />
<br />
===Minors===<br />
#The Nanaimo Makerspace is not a day care. Due to safety and insurance we have the following restrictions around minors:<br />
#Ages 18 and under must be '''*accompanied closely*''' by Parent or Legal Guardian at all times and are not allowed to have keys to the space.<br />
#*'''*Accompanied closely*''' means visual range generally, and immediate reach when near dangerous tools.<br />
#*Ages 14-18 may use the space and tools under direct guardian supervision. The guardian must be a full member and must know how to use the tool in question. For example, a minor may not use the lathe if the guardian has not been approved to use the lathe.<br />
#*Ages under 14 may accompany a member, but may not use any tools. Please ask if you are unsure.<br />
#Parents/Legal Guardians are responsible for their children and their actions.<br />
#Minors under the age of 19 must have their liability form signed by a Parent or Legal Guardian.<br />
<br />
===Comments/Complaints===<br />
Please contact the [[Leadership Team]] with any comments or complaints that you have.<br />
<br />
===Non-Discrimination===<br />
Nanaimo Makerspace does not promote or discriminate against any person, population group, or organisation. These include, but are not limited to race, colour, religion, sex, gender expression, physical appearance, language, education background, national origin, age, disability, and veteran status.<br />
<br />
===Anti-Harassment===<br />
Harassment is prohibited and will not be tolerated. Any person who feels they <br />
have been the victim of harassment should ask the harasser to cease the <br />
behavior, if they feel safe doing so. Members or guests asked to stop any <br />
harassing behavior are expected to comply immediately. Harassment includes the <br />
following, without limitation:<br />
#Offensive comments related to race, religion, gender, gender identity and expression, sexual orientation, disability, or physical appearance<br />
#Gratuitous sexual or obscene images or behavior in spaces where not appropriate<br />
#Unwelcome physical contact or sexual attention without consent or after a request to stop<br />
#Threats or incitement of violence towards any individual, including encouraging a person to engage in self-harm<br />
#Deliberate intimidation by words, gestures, body language, or menacing behavior<br />
#Stalking<br />
#Harassing photography or recording, including logging online activity for harassment purposes<br />
#Continued one-on-one contact or communication after requests to cease<br />
#Deliberate "outing" of a sensitive aspect of a person’s identity without their consent<br />
#Deliberate misgendering. This includes deadnaming or persistently using a pronoun that does not correctly reflect a person's gender identity<br />
<br />
==Storage==<br />
*Please reference our storage tag guidelines here: [[Storage_Tags]]<br />
**The Nanaimo Makerspace is not a storage facility. Projects and materials that do not follow these rules, will be considered donations.<br />
*Firearms, gunpowder, primers, and assembled ammunition cannot be stored at the Makerspace.<br />
<br />
==Loaning of Tools & Equipment To The Makerspace==<br />
Members can generously provide tools or equipment for use in the space, either by donating them outright or by loaning them.<br />
<br />
When equipment is loaned, the following conditions apply:<br />
<br />
#All loaned equipment must be marked or labeled with the owner's name<br />
#The owner must contact the [[Leadership Team]] so that they can record the following information:<br />
##Name of owner<br />
##Equipment being loaned<br />
##Serial number if available<br />
##Terms or conditions of the loan<br />
#Equipment is loaned subject to the understanding that it is preferable for NMS to own their equipment, rather than borrow it. NMS may seek to buy equipment in order to replace loaned items, which are then returned.<br />
#Loaned items may be returned at any time, by request of the owner or as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.<br />
<br />
==Donations==<br />
<br />
See [[Donations]]<br />
<br />
==Cancellation==<br />
<br />
# Paypal subscription<br />
#* You can cancel your Paypal subscription through their recurring payments dashboard ([https://www.paypal.com/cgi-bin/webscr?cmd=_manage-paylist link]) at any time. <br />
# Other forms of payment (cash, single paypal transaction, e-transfer)<br />
#* These are non-recurring types of payment that do not require further action to cancel.<br />
# When your current membership credit runs out, your fob will automatically disable. When you want to come back in the future, just make a payment through the portal, and your fob will automatically re-enable.<br />
<br />
<br />
==Notes==<br />
These guidelines are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.<br />
<br />
[[Category:Nanaimo Makerspace]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Guidelines&diff=1253Guidelines2020-11-12T22:22:54Z<p>Jordan: /* Minors */</p>
<hr />
<div>==Code of Conduct==<br />
#All guests and members must follow the Code of Conduct.<br />
#Safety is important, if you are unsure of how to safely do something, don’t do it.<br />
#Don't merely respect each other; be excellent to each other.<br />
#*We are all here to make things and learn. Collaboration is important.<br />
#*When you break something, own up to it. If you have any doubt about fixing it, ask for help. Don't make someone feel bad for breaking things, help them understand what went wrong. You will not be asked to replace/repair equipment due to honest mistakes, we just want to know '''why''' something broke so we can prevent it in the future.<br />
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.<ref>This includes taking out the trash, wiping down tables, vacuuming/sweeping floors, returning tools to the proper place, etc.<br />
#*Don't be afraid to ask questions. Answer them kindly; eventually you'll have to ask for help too.<br />
#*Tools/resources must stay on the premises so that other members may use them.<ref>Removing tools/resources from the space without authorisation from the [[Leadership Team]] is theft.<br />
#Everyone must sign a liability waiver.<br />
#All members are expected to maintain a safe and clean environment at all times.<br />
#Don't catch fire, set others on fire, or set anything on fire which has not been designated or designed to be on fire.<br />
#Harmful behavior, harrassment, stalking, theft, hazing, and otherwise being the opposite of excellent is unacceptable.<br />
#It is the responsibility of each member to help enforce the Code of Conduct. If someone is violating the Code of Conduct politely explain to them why their behaviour is not acceptable. Egregious violations should be reported to the [[Leadership Team]].<br />
<br />
===Guests===<br />
#Guests can not inhabit the Nanaimo Makerspace without another keyed Member present.<br />
#If guests are using tools and workspace alongside you, we ask they make a honorarium donation of $5/visit.<br />
#Guests must sign a liability waiver immediately upon entering the space.<br />
#Guests are encouraged to become Members.<br />
#Members are responsible for their Guests and their actions.<br />
<br />
===Minors===<br />
#The Nanaimo Makerspace is not a day care. Due to safety and insurance we have the following restrictions around minors:<br />
#Ages 18 and under must be '''*accompanied closely*''' by Parent or Legal Guardian at all times and are not allowed to have keys to the space.<br />
#*'''*Accompanied closely*''' means visual range generally, and immediate reach when near dangerous tools.<br />
#*Ages 14-18 may use the space and tools under direct guardian supervision. The guardian must be a full member and must know how to use the tool in question. For example, a minor may not use the lathe if the guardian has not been approved to use the lathe.<br />
#*Ages under 14 may accompany a member, but may not use any tools. Please ask if you are unsure.<br />
#Parents/Legal Guardians are responsible for their children and their actions.<br />
#Minors under the age of 19 must have their liability form signed by a Parent or Legal Guardian.<br />
<br />
===Comments/Complaints===<br />
Please contact the [[Leadership Team]] with any comments or complaints that you have.<br />
<br />
===Non-Discrimination===<br />
Nanaimo Makerspace does not promote or discriminate against any person, population group, or organisation. These include, but are not limited to race, colour, religion, sex, gender expression, physical appearance, language, education background, national origin, age, disability, and veteran status.<br />
<br />
===Anti-Harassment===<br />
Harassment is prohibited and will not be tolerated. Any person who feels they <br />
have been the victim of harassment should ask the harasser to cease the <br />
behavior, if they feel safe doing so. Members or guests asked to stop any <br />
harassing behavior are expected to comply immediately. Harassment includes the <br />
following, without limitation:<br />
#Offensive comments related to race, religion, gender, gender identity and expression, sexual orientation, disability, or physical appearance<br />
#Gratuitous sexual or obscene images or behavior in spaces where not appropriate<br />
#Unwelcome physical contact or sexual attention without consent or after a request to stop<br />
#Threats or incitement of violence towards any individual, including encouraging a person to engage in self-harm<br />
#Deliberate intimidation by words, gestures, body language, or menacing behavior<br />
#Stalking<br />
#Harassing photography or recording, including logging online activity for harassment purposes<br />
#Continued one-on-one contact or communication after requests to cease<br />
#Deliberate "outing" of a sensitive aspect of a person’s identity without their consent<br />
#Deliberate misgendering. This includes deadnaming or persistently using a pronoun that does not correctly reflect a person's gender identity<br />
<br />
==Storage==<br />
*Please reference our storage tag guidelines here: [[Storage_Tags]]<br />
**The Nanaimo Makerspace is not a storage facility. Projects and materials that do not follow these rules, will be considered donations.<br />
*Firearms, gunpowder, primers, and assembled ammunition cannot be stored at the Makerspace.<br />
<br />
==Loaning of Tools & Equipment To The Makerspace==<br />
Members can generously provide tools or equipment for use in the space, either by donating them outright or by loaning them.<br />
<br />
When equipment is loaned, the following conditions apply:<br />
<br />
#All loaned equipment must be marked or labeled with the owner's name<br />
#The owner must contact the [[Leadership Team]] so that they can record the following information:<br />
##Name of owner<br />
##Equipment being loaned<br />
##Serial number if available<br />
##Terms or conditions of the loan<br />
#Equipment is loaned subject to the understanding that it is preferable for NMS to own their equipment, rather than borrow it. NMS may seek to buy equipment in order to replace loaned items, which are then returned.<br />
#Loaned items may be returned at any time, by request of the owner or as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.<br />
<br />
==Donations==<br />
<br />
See [[Donations]]<br />
<br />
==Notes==<br />
These guidelines are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.<br />
<br />
[[Category:Nanaimo Makerspace]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Guidelines&diff=1252Guidelines2020-11-12T22:20:20Z<p>Jordan: /* Minors */</p>
<hr />
<div>==Code of Conduct==<br />
#All guests and members must follow the Code of Conduct.<br />
#Safety is important, if you are unsure of how to safely do something, don’t do it.<br />
#Don't merely respect each other; be excellent to each other.<br />
#*We are all here to make things and learn. Collaboration is important.<br />
#*When you break something, own up to it. If you have any doubt about fixing it, ask for help. Don't make someone feel bad for breaking things, help them understand what went wrong. You will not be asked to replace/repair equipment due to honest mistakes, we just want to know '''why''' something broke so we can prevent it in the future.<br />
#*Clean, Maintain, Organize, Improve. Always leave the space better than you found it.<ref>This includes taking out the trash, wiping down tables, vacuuming/sweeping floors, returning tools to the proper place, etc.<br />
#*Don't be afraid to ask questions. Answer them kindly; eventually you'll have to ask for help too.<br />
#*Tools/resources must stay on the premises so that other members may use them.<ref>Removing tools/resources from the space without authorisation from the [[Leadership Team]] is theft.<br />
#Everyone must sign a liability waiver.<br />
#All members are expected to maintain a safe and clean environment at all times.<br />
#Don't catch fire, set others on fire, or set anything on fire which has not been designated or designed to be on fire.<br />
#Harmful behavior, harrassment, stalking, theft, hazing, and otherwise being the opposite of excellent is unacceptable.<br />
#It is the responsibility of each member to help enforce the Code of Conduct. If someone is violating the Code of Conduct politely explain to them why their behaviour is not acceptable. Egregious violations should be reported to the [[Leadership Team]].<br />
<br />
===Guests===<br />
#Guests can not inhabit the Nanaimo Makerspace without another keyed Member present.<br />
#If guests are using tools and workspace alongside you, we ask they make a honorarium donation of $5/visit.<br />
#Guests must sign a liability waiver immediately upon entering the space.<br />
#Guests are encouraged to become Members.<br />
#Members are responsible for their Guests and their actions.<br />
<br />
===Minors===<br />
#The Nanaimo Makerspace is not a day care. Due to safety and insurance we have the following restrictions around minors:<br />
#Ages 18 and under must be '''*accompanied closely*''' by Parent or Legal Guardian at all times and are not allowed to have keys to the space.<br />
##Ages 14-18 may use the space and tools under direct guardian supervision. The guardian must be a full member and must know how to use the tool in question. For example, a minor may not use the lathe if the guardian has not been approved to use the lathe.<br />
##Ages under 14 may accompany a member, but may not use any tools. Please ask if you are unsure.<br />
#Parents/Legal Guardians are responsible for their children and their actions.<br />
#Minors under the age of 19 must have their liability form signed by a Parent or Legal Guardian.<br />
<br />
: '''*Accompanied closely*''' means visual range generally, and immediate reach when near dangerous tools.<br />
<br />
===Comments/Complaints===<br />
Please contact the [[Leadership Team]] with any comments or complaints that you have.<br />
<br />
===Non-Discrimination===<br />
Nanaimo Makerspace does not promote or discriminate against any person, population group, or organisation. These include, but are not limited to race, colour, religion, sex, gender expression, physical appearance, language, education background, national origin, age, disability, and veteran status.<br />
<br />
===Anti-Harassment===<br />
Harassment is prohibited and will not be tolerated. Any person who feels they <br />
have been the victim of harassment should ask the harasser to cease the <br />
behavior, if they feel safe doing so. Members or guests asked to stop any <br />
harassing behavior are expected to comply immediately. Harassment includes the <br />
following, without limitation:<br />
#Offensive comments related to race, religion, gender, gender identity and expression, sexual orientation, disability, or physical appearance<br />
#Gratuitous sexual or obscene images or behavior in spaces where not appropriate<br />
#Unwelcome physical contact or sexual attention without consent or after a request to stop<br />
#Threats or incitement of violence towards any individual, including encouraging a person to engage in self-harm<br />
#Deliberate intimidation by words, gestures, body language, or menacing behavior<br />
#Stalking<br />
#Harassing photography or recording, including logging online activity for harassment purposes<br />
#Continued one-on-one contact or communication after requests to cease<br />
#Deliberate "outing" of a sensitive aspect of a person’s identity without their consent<br />
#Deliberate misgendering. This includes deadnaming or persistently using a pronoun that does not correctly reflect a person's gender identity<br />
<br />
==Storage==<br />
*Please reference our storage tag guidelines here: [[Storage_Tags]]<br />
**The Nanaimo Makerspace is not a storage facility. Projects and materials that do not follow these rules, will be considered donations.<br />
*Firearms, gunpowder, primers, and assembled ammunition cannot be stored at the Makerspace.<br />
<br />
==Loaning of Tools & Equipment To The Makerspace==<br />
Members can generously provide tools or equipment for use in the space, either by donating them outright or by loaning them.<br />
<br />
When equipment is loaned, the following conditions apply:<br />
<br />
#All loaned equipment must be marked or labeled with the owner's name<br />
#The owner must contact the [[Leadership Team]] so that they can record the following information:<br />
##Name of owner<br />
##Equipment being loaned<br />
##Serial number if available<br />
##Terms or conditions of the loan<br />
#Equipment is loaned subject to the understanding that it is preferable for NMS to own their equipment, rather than borrow it. NMS may seek to buy equipment in order to replace loaned items, which are then returned.<br />
#Loaned items may be returned at any time, by request of the owner or as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for maintenance of loaned equipment, but may maintain it as determined by the [[Leadership Team]].<br />
#NMS is NOT responsible for the damage, theft, or loss of equipment. However, efforts will be made to provide reasonably secure storage.<br />
<br />
==Donations==<br />
<br />
See [[Donations]]<br />
<br />
==Notes==<br />
These guidelines are not officially part of the Rules or Bylaws and are only meant to provide additional information or an interpretation of the Rules and/or Bylaws.<br />
<br />
[[Category:Nanaimo Makerspace]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Laser_Cutter&diff=1249Laser Cutter2020-11-04T18:42:55Z<p>Jordan: /* Learning Youtube Channels */</p>
<hr />
<div>[[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|320px]]<br />
<br />
== About == <br />
<br />
*'''Issues: Please contact [[Laser Cutter Team]]'''<br />
<br />
*aka "''Mr. Burns''", "''Lazer''" (for Andrew)<br />
<br />
[[File:Laser_cutter_on_table_-_Jan_2019.jpg|450px|laser cutter its table in the metal shop]]<br />
<br />
===Machine specs===<br />
<br />
* Make: [https://hl-yeah.com/ HL-Yeah]<br />
* Model: [https://hl-yeah.com/2017/03/29/hl-zxp-1060-100w-c02-laser-cutter-engraving-machine-with-dsp-system/ HL-ZXP 1060 100W] (975 mm x 600 mm working area) [https://hl-yeah.com/2017/08/01/dsp-1060-100w-engravecut-cardboard-and-the-product-very-beautifully/]<br />
**Manual: [https://drive.google.com/open?id=1-5BRDRmrvgItKASW_j3WHnNYIVKwraZ0 Download]<br />
**https://youtu.be/z0I_VBttqEI<br />
**https://youtu.be/xphDmXKrCgg<br />
* [http://www.recilaser.com/en/index.php?m=&c=Index&a=show&catid=7&id=66 Reci W2 (90W-100W) CO2 laser tube]<br />
**''"The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA."''<br />
*** 75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings<br />
**[[:Media:Laser_Tube_Power_Supply.jpg|HY-100W laser tube power supply]] [http://www.laserpwr.com][http://jnhyec.com]<br />
***220VAC +/- 10% input, 40kVDC output (32mA max)<br />
* D&N CW5000 chiller<br />
**120VAC, 6.5A, 750W capacity<br />
**[[File:Laser_chiller_manual.pdf|User Manual]]<br />
**[[File:Laser_chiller_maint_manual.pdf|Maintenance Manual]]<br />
* Ruida controller ("[[:Media:Laser_controller.jpg|RDC6442S-B(EC)]]")<br />
** HL-1060 RDworks software download: https://hl-yeah.com/2017/07/03/hanlaser-hl-1060-100w130w-ruida-dsp-rdc6442gs-download/<br />
***RDWorks v8.01.34 - http://www.mediafire.com/file/6g351955fd79ojv/RDWorksV8__8.01.34.rar/file<br />
****[[Setting Up RDWorks]]<br />
** [http://en.rd-acs.com/down.aspx Ruida English site downloads (includes RDImage)]<br />
** Hardware Manual: http://en.rd-acs.com/Private/Files/a4d9f12fe9e32eb7.pdf<br />
** RDWorks v8 Software Manual: http://www.thunderlaser.com/download/down/RDWorksV8_Software_and_the_plug_in_software_SetUp_Manual.pdf<br />
** RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software): https://drive.google.com/open?id=1-sU_TFE8RdZfG81w6d70Xi1PCEsz9MSt<br />
* Lifting platform (200 mm) honeycomb work table<br />
* [[Laser_Rotary_Tool_Instructions|Rotary axis]]<br />
* Auto focus<br />
** 2DM542-06 stepper motor driver for Z axis<br />
***[[:File:Laser_z_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''OFF''', SW 2 '''OFF''', SW 3 '''OFF''' --> 5.6A peak current<br />
*** SW 4 '''OFF''' -->standby current, half <br />
*** SW 5 '''OFF''', SW 6 '''ON''', SW 7 '''OFF''', SW 8 '''ON''' -->6400 steps per revolution<br />
* Optics<br />
** Focal lens (diameter 20mm, focal length 63.5mm(2.5"))<br />
** Mirror diameter is 20mm<br />
* [[:File:MGN rail specs.jpg|MGN12 linear rail on X-axis]], 1060 mm long<br />
** [[:File:MGN rail specs.jpg|MGN12C linear bearing]]<br />
* Nema 17 Stepper motor system<br />
** 17HW4410H Stepper motors<br />
** Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis<br />
***[[:File:Laser_stepper_driver.jpg|Picture of settings]]<br />
*** SW 1 '''ON''', SW 2 '''OFF''', SW 3 '''OFF''', SW 4 '''ON''' --> 0.7A peak current<br />
*** SW 5 '''OFF''' --> auto half current<br />
*** SW 6 '''OFF''', SW 7 '''OFF''', SW 8 '''OFF''' -->32 microstepping, 6400 pulse/rev.<br />
* [[:Media:Laser_cutter_wiring_diagram.jpg|Wiring Diagram with mods]]<br />
<br />
===Additional infrastructure===<br />
<br />
* Ventilation<br />
**[https://www.amazon.ca/gp/product/B01CTM0JF2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A]<br />
* Fire suppression<br />
* Safety glasses<br />
** 1 pair received with laser cutter (dark lenses), 2 pair of [https://www.ebay.ca/itm/CO2-Laser-Protective-Goggles-Safety-Glasses-10-64UM-OD-7-Double-Layer-Eyewear/323353490327 laser safety glasses] from eBay sellers.<br />
* Laser power meter - received 0-200W laser power meter "POWERGAUGE V1" from eBay seller ukemm_qewpbhg<br />
** [[File:POWERGAUGE-V1-instuctions-version2.pdf]]<br />
* Cart / Stand (4'W x 3'D x 2'H) (built by Ken K)<br />
* 0-30ma DC Analog Ammeter<br />
* Spares / Consumables<br />
**Mirrors (3), diameter?<br />
**Focus Lens (1), diameter? focal length?<br />
** Cleaning swabs<br />
** Isopropyl Alcohol<br />
** DI water for chiller<br />
<br />
== [https://makerspacenanaimo.org/laser/ Payments] ==<br />
<br />
https://makerspacenanaimo.org/laser/<br />
*[https://makerspacenanaimo.org/laser/ '''WORKSHOP FEE''' – $50 ''(One-time payment)'']<br />
*[https://makerspacenanaimo.org/laser/ '''MONTHLY USAGE FEE''' – $10/mo ''(Subscription per calendar month)'']<br />
<br />
== [[Laser Cutter Materials|Materials]] ==<br />
'''[[Laser Cutter Materials]]'''<br />
{{:Laser_Cutter_Materials}}<br />
<br />
== Samples ==<br />
<br />
==='''[[Laser Cut Projects]]''' done in the Makerspace.===<br />
<gallery><br />
File:2019-01-19 00.21.28 makerspace logo plywood.jpg|[[Laser_Cut_Projects#Makerspace_Nanaimo_logo_in_plywood|Makerspace logo engraved and cut in plywood]]<br />
File:2019-01-30 04.09.02 LASER PC case.jpg|[[Laser_Cut_Projects#LASER_PC_panel|LASER engraved in PC side panel]]<br />
File:2019-01-30 21.31.06 Marvel Calendar.jpg|[[Laser_Cut_Projects#Marvel_Calendar|Marvel Calendar]]<br />
File:2019-01-30 21.54.28 ceramic tile1.jpg|[[Laser_Cut_Projects#Ceramic_tile_first_test:_Makerspace_logo|Ceramic tile (first)]]<br />
File:2019-01-30 22.58.30 ceramic tile2.jpg|[[Laser_Cut_Projects#Ceramic_tile_second_test:_Makerspace_logo_.28bigger.29|Ceramic tile (second)]]<br />
File:2019-01-31 00.25.36 mirror backside etched backlit.jpg|[[Laser_Cut_Projects#Mirror_backside_first_test:_Penrose_tile|Mirror etched from backside, backlit - penrose tile.]]<br />
File:2019-01-31 00.20.03 glass mirror frontside1.jpg|[[Laser_Cut_Projects#Glass_mirror_frontside_first_test:_Penrose_tile|Mirror etched from front side - penrose tile.]]<br />
File:2019-02-03 00.42.23 racing car corrugated cardboard.jpg|[[Laser_Cut_Projects#Racing_Car_3D_Puzzle|Racing Car 3D Puzzle cut from cardboard]]<br />
File:2019-01-28 18.05.55 oak quarterinch powerlevels.jpg|[[Laser_Cut_Projects#Power_levels_test_on_1.2F4.22_Oak|Power levels test in 1/4" oak]]<br />
File:Laser rubber stamp.jpg|[[Laser_Cut_Projects#Rubber Stamp|Rubber Stamp]]<br />
</gallery><br />
<br />
===Videos of the laser in action===<br />
<br />
* [https://www.youtube.com/watch?v=fh6Raec0oVs Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter] (< 1 minute)<br />
* [https://www.youtube.com/watch?v=mM5pgvoD8HY Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser)] (20 seconds)<br />
* [https://www.youtube.com/watch?v=2V7QaNHI9Ag Makerspace Nanaimo on YouTube: Laser engraving dragon on anodised aluminum business card] (1m50s)<br />
<br />
===Other sites===<br />
<br />
*https://www.troteclaser.com/en/knowledge/do-it-yourself-samples/<br />
*https://www.epiloglaser.com/resources/sample-club.htm<br />
*https://www.bosslaser.com/laser-files/downloads/<br />
*http://www.rabbitlaserusa.com/index.php?route=information/information&information_id=20<br />
*http://www.thunderlaser.com/category/sample-club<br />
*http://www.3axis.co/<br />
*[https://cartonus.com/category/free/ Cartonus] - Designs for laser cutting<br />
<br />
===Facebook groups===<br />
<br />
*https://www.facebook.com/groups/1649552468616089/ - Laser & CNC cut patterns (closed group)<br />
*https://www.facebook.com/groups/955418137942545/ - hobby Cnc laser cut free cdr dxf file (closed group)<br />
<br />
== Design Resources ==<br />
<br />
{{2D Design Software}}<br />
<br />
{{3D Design Software}}<br />
<br />
===Other Tools===<br />
<br />
* [https://festi.info/boxes.py/ Boxes.py] - Create boxes and more with a laser cutter! Boxes.py is an Open Source box generator written in Python. It features both finished parametrized generators as well as a Python API for writing your own. It features finger and (flat) dovetail joints, flex cuts, holes and slots for screws, hinges, gears, pulleys and much more.<br />
<br />
* [https://www.templatemaker.nl/cardbox Template maker - Card Box] A long, thin box. Suitable for chocolate cigaretes, playing cards, etc. <br />
<br />
* [https://boxdesigner.connectionlab.org/ Box Designer] Give us dimensions and we'll generate a PDF you can use to cut a notched box on a laser-cutter.<br />
<br />
* [https://makeabox.io/ makeabox.io] Another online notched box designer.<br />
<br />
* [https://cdn.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html Jigsaw Puzzle Generator]<br />
<br />
* [https://deepnest.io/ Deepnest] - Open source nesting software. Great for laser cutters, plasma cutters, and other CNC machines.<br />
<br />
* [https://svgnest.com/ SVGnest] - Open Source nesting.<br />
<br />
* [https://apps.autodesk.com/FUSION/en/Detail/Index?id=8699194120463301363 Slicer for Fusion 360] - Slices and converts 3D models (STL, OBJ) into 2D (EPS, DXF, PDF) patterns that you can cut out of any flat material. Slicer for Fusion 360 also creates 3D instructions you can interact with, to help build a model. Can be run standalone or an app within Fusion 360.<br />
<br />
== Learning Resources ==<br />
<br />
===Laser Cutter Training===<br />
*[[Using the Laser Cutter]]<br />
*[[Media:Laser_Cutter_Training_slideshow.pdf]]<br />
<br />
===Manufacturer Youtube Channels (lots of projects)===<br />
*[https://www.youtube.com/user/TrotecLaserCanada/videos Trotec Laser Canada]<br />
*[https://www.youtube.com/user/epilogben/videos Epilog Laser]<br />
*[https://www.youtube.com/user/THUNDERLASERSYSTEM/videos Thunder Laser]<br />
*[https://www.youtube.com/user/FullSpectrumLasers/videos Full Spectrum Laser]<br />
<br />
===Learning Youtube Channels===<br />
*[https://www.youtube.com/user/SarbarMultimedia/videos Youtube - Sarbar Multimedia / RDWorks Learning Lab]<br />
**[[https://drive.google.com/file/d/1FxeRgPayW3V3KZHgOJyjMftVk9ryoPUN/view?usp=sharing Rdworks_learning_lab_index_(up_to_162).pdf]]] (721 KB)<br />
*[https://www.youtube.com/channel/UCt0DQv9k4hbgTEhtFJRBdfA/videos Youtube - Thinklaser]<br />
<br />
===Misc===<br />
*[https://hackaday.com/2016/05/31/how-to-fail-at-laser-cutting/ Hackaday - How to fail at laser cutting]<br />
*[https://www.cnczone.com/forums/laser-engraving-and-cutting-machines/ CNC Zone - Laser Cutter subforum]<br />
*[https://sawmillcreek.org/forumdisplay.php?8-Laser-Engraving-General-Topics Sawmill Creek - Laser Engraving subforum]<br />
*[https://rdworkslab.com/ RdWorksLab Forum]<br />
*[https://www.reddit.com/r/lasercutting/ Reddit - Lasercutting]<br />
*http://www.thunderlaser.com/laser-download<br />
*http://www.thunderlaser.com/video/how-to-use-your-laser-machine.html<br />
<br />
== Photos ==<br />
<br />
<gallery><br />
File:Laser_cutter_on_pallet.jpg|Laser cutter, uncrated but still on the pallet.<br />
File:2019-01-11 Laser cutter back.jpg|Back of the laser cutter.<br />
File:2019-01-11 Exhaust fan.jpg|Laser cutter exhaust fan (6")<br />
File:2019-01-11 Laser cutter and accessories.jpg|Laser cutter and accessories.<br />
File:2019-01-11 Laser cutter accessories.jpg|Accessories received with laser cutter.<br />
File:2019-01-11 Chiller and rotary axis.jpg|Water chiller and rotary axis for laser cutter.<br />
File:2019-01-11 Laser tube Reci 90W.jpg|Reci 90W CO2 laser tube in laser cutter.<br />
File:2019-01-11 Laser tube label.jpg|Label of Reci 90W CO2 laser tube.<br />
File:2019-01-11 Laser cutter back panel.jpg|Back panel on laser cutter.<br />
File:2019-01-11 Laser cutter front label.jpg|Top label and Ruida front control panel of laser cutter.<br />
</gallery><br />
<br />
== Maintenance ==<br />
<br />
[https://www.youtube.com/watch?v=oZCMgLGNwA0 Focus lens removal]<br />
<br />
https://k40laser.se/faq-how-to/<br />
<br />
https://k40laser.se/lens-mirrors/mirror-alignment-the-ultimate-guide/<br />
<br />
http://www.thunderlaser.com/troubleshooting/maintenance/maintain.html<br />
<br />
[https://www.thingiverse.com/thing:2243854 Thingiverse - Material Test Card for Laser Cutting and Engraving (SVG)]<br />
<br />
<br />
=== Usage Statistics ===<br />
<br />
{| class="wikitable" style="text-align: right;"<br />
! Date <br />
! Total on time <br/> (hh:mm:ss)<br />
! Total processing time <br/> (hh:mm:ss)<br />
! Total laser on time <br/> (hh:mm:ss)<br />
! Total processing times <br/> (#)<br />
! X Total travel <br/> (m) <br />
! Y Total travel <br/> (m)<br />
|-<br />
| January 29, 2019 || 0 || 0 || 0 || 0 || 0 || 0<br />
|-<br />
| August 14, 2019 || 615:42:00 || 330:47:29 || 159:41:37 || 2128 || 202472 || 6153<br />
|-<br />
| September 04, 2019 || 668:45:00 || 353:14:55 || 171:34:52 || 2491 || 217446 || 6937<br />
|-<br />
| November 20, 2019 || 835:03:30 || 425:39:47 || 209:57:19 || 3422 || 262530 || 9827<br />
|-<br />
| February 20, 2020 || 1011:44:30 || 512:16:46 || 257:44:36 || 4553 || 315267 || 12377<br />
|-<br />
| March 04, 2020 || 1081:34:00 || 550:26:27 || 278:49:00 || 5039 || 342103 || 13323<br />
|-<br />
| March 11, 2020 || 1099:27:30 || 559:39:39 || 281:35:58 || 5157 || 351965 || 13447<br />
|-<br />
| May 09, 2020 || 1154:37:00 || 583:19:33 || 296:51:20 || 5711 || 367096 || 14201<br />
|}<br />
<br />
=== Maintenance Log ===<br />
<br />
* 2019-02-XX JP: Re-wired door switch to Ruida controller input CN2-3 "DrProc" and GND<br />
<br />
* 2019-02-XX JP: Laser power min/max set in vendor settings to 7%/75% for tube life longevity<br />
**75% draws 25mA, measured with Fluke ammeter.<br />
**7% etches paper, minimum viable power.<br />
<br />
* 2019-02-XX JP: Mains input is now 120VAC<br />
** Contactor installed to switch mains 120VAC.<br />
** Emergency stop button now in series with contactor coil, instead of main power circuit.<br />
** 120VAC->220VAC transformer installed in electronics compartment. Fed 120VAC mains, output to 220VAC distribution terminal block.<br />
<br />
* 2019-03-XX JP: SSR installed in electronics compartment for future RFID interlocking<br />
<br />
* 2019-04-03 JP: Hard-wired external exhaust fan, water chiller and air assist pump to turn on with main laser power.<br />
**250VAC inline socket/plug set inside cabinet for 220VAC air assist pump<br />
**120VAC dual-socket electrical box inside cabinet for water chiller and exhaust fan<br />
**Exhaust fan speed controller removed. Straight 120VAC extension cord installed and run along exhaust ducting back to laser electronics cabinet.<br />
<br />
* 2019-04-08 JP: Ordered qty 2, 20mm dia. x 63.5mm focal length, focus lenses. [https://www.aliexpress.com/item/China-ZnSe-Focus-Lens-CO2-Laser-Engraving-Cutter-DIa-18mm-FL-50-8mm-2/32241074105.html AliExpress]<br />
** 2019-04-29 JP: Arrived.<br />
<br />
* 2019-07-23 MS: Reported that the machine would not power on.<br />
** 2019-07-24 CB: Discovered IEC power entry module failed; replaced with available non-fuse version.<br />
<br />
* 2019-11-06 JP: Raster engraving was showing blurred edges on the extreme bounds of graphics. As speed increased, problem was worse.<br />
** 2019-11-06 JP: Added lock washers to fasteners holding lens assembly to bearing bracket which resolved the issue.<br />
<br />
* 2019-11-08 DS: Laser PC upgraded to i7 with SSD<br />
<br />
* 2020-02-12 JP: 2nd & 3rd mirrors replaced with "Mo" coated spares<br />
**[[Media:Laser_mirror_replacement1a.jpg]]<br />
**[[Media:Laser_mirror_replacement1b.jpg]]<br />
<br />
* 2020-02-12 JP: Red dot point reported not working; broken wire found in cable chain<br />
** replaced all 3 wires in X-axis portion of cable chain<br />
<br />
* 2020-02-25 JP: optics spares received<br />
**[[Media:Laser_optics_order_20200225.jpg]]<br />
<br />
* 2020-03-11 JP: installed 2x SPDT 24VDC relays on +24VDC and "status" output of Ruida controller to monitor power and running status<br />
** COM/NO contacts will interface with RFID interlock system<br />
<br />
* 2020-09-13 RR: X-axis linear bearing sounding worn out<br />
** 2020-09-29 JP: "MGN12C" bearing ordered; 1x from [https://spool3d.ca/mgn12-block-for-linear-guide/ Spool3D], 2x from [https://www.ebay.ca/itm/MGN12C-Mini-Guide-Rail-Linear-Block-Sliding-Precision-Measurement/223993095548 ebay]<br />
<br />
[[Category:Tools]]<br />
[[Category:Laser]]<br />
[[Category:Creative_Arts]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Tools&diff=1243Tools2020-10-03T20:21:09Z<p>Jordan: /* Metal Shop */</p>
<hr />
<div>This is a (non-comprehensive) list of tools at Makerspace Nanaimo. This list will help us keep track of information about the tools and who donated/loaned it. '''All tools/resources must stay on the premises so that other members may use them.'''<br />
<br />
In addition to tools, Makerspace has some [[Larger_work_surfaces|tables and larger work surfaces]] available for members to work on projects and to use as meeting and collaboration spaces.<br />
<br />
== [[:Category:3D Fabrication|3D Fabrication]] ==<br />
<br />
'''Repetier 3D Printing Server: http://10.40.5.52:3344/'''<br />
<br />
[https://www.simplify3d.com/support/print-quality-troubleshooting/ Print Quality Troubleshooting Guide - Simplify3D]<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:PrintrbotSimpleMetal-Black.jpg|link=Printrbot Simple Metal|upright|150px]] || [[Printrbot Simple Metal|3D printers (QTY: 3)]] <br> 6″ x 6″ x 6″ <br>150mm x 150mm x 150mm <br> 1.75mm PLA || Printrbot Simple Metal <br> <br> [https://printrbot.com/project/simple-metal/ Manufacturer's Specs] || 110 || ? || Yes || Owned by Makerspace Nanaimo<br />
|-<br />
|}<br />
<br />
== [[:Category:Creative Arts|Creative Arts (Crafts)]] ==<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:Reci_100W_Laser_Engrave_Machine_eBay.jpg|link=Laser Cutter|upright|150px]] || [[Laser Cutter]] <br> (1000 mm x 600 mm) <br> [[Laser Cutter Materials]] || Reci 100W 1060 Laser Cutter || 220 || ? || Yes || ?<br />
|-<br />
| [[File:industrial_sewing_machine1.jpg|link=Industrial Sewing Machine|upright|150px]] || [[Industrial Sewing Machine]] <br> (Medium - Heavy Material) <br> (Max. Sewing Speed 2,000 spm) || Mason Sunstar KM-340 BL || 120 || ? || Yes || Owned by Makerspace Nanaimo<br />
<!--<br />
|-<br />
| [[File:SilhouetteCameo2.jpg|link=Vinyl Cutter|upright|150px]] || [[Vinyl Cutter]] <br> (12" wide) || Silhouette Cameo<br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1491 member]<br />
--><br />
|-<br />
| [[File:LabelWriter_400.jpg|link=Label Printer|upright|150px]] || [[Label Printer]] <br> (2.3" wide) || Dymo LabelWriter 400 <br> <br> [http://www.dymo.com/en-CA/labelwriter-400-label-printer Manufacturer's Specs] || 110 || ? || No || ?<br />
|-<br />
| [[File:Elekmaker Drawbot.jpg|link=EleksDraw Drawbot|upright|150px]] || [[Drawbot]] <br> (280mm x 200mm) || EleksMaker EleksDraw <br> XY Plotter Drawbot<br> <br> [http://wiki.eleksmaker.com/doku.php?id=eleksdraw Manufacturer Website] || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1336 member]<br />
|-<br />
| [[File:Brother_DCP7060D.jpg|link=Office Supplies|upright|150px]] || [[Office Supplies]] || various || 110 || ? || No || Owned by Makerspace<br />
|-<br />
|}<br />
<br />
== [[:Category:Electronics|Electronics]] ==<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:Electronics Workbench 20190221.jpg|link=Electronics Workbench|upright|150px]] || [[Electronics Workbench]]<br> || Collection || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
| [[File:PCB Engraving Machine.png|link=PCB Prototyping Machine|upright|150px]] || [[PCB Prototyping Machine]]<br>(60k RPM, 12"x10"x7/8") || AccurateCNC 350 <br> <br> [http://web.archive.org/web/20071230052021/http://www.accuratecnc.com:80/products.html Manufacturer's Specs] || 110 || ? || Yes || Donated by [http://www.inuktun.com Inuktun]<br />
|-<br />
| [[File:Reflow_oven.jpg|link=Reflow Oven|upright|150px]] || [[Reflow Oven]]<br>(specs) || DIY <br> <br> [https://hackaday.io/project/8543-reflow-oven Hackaday IO page] || 110 || ? || ? || Owned by [https://members.makerspacenanaimo.org/members/view/1159 member]<br />
|-<br />
| [[File:Soldering_iron.jpg|link=Hakko Soldering Iron|upright|150px]] || [[Hakko Soldering Iron]] (QTY:8) <br> 120° - 899°F (50° - 480°C) || Hakko FX-888D <br> <br> [https://www.hakkousa.com/products/soldering/hakko-fx-888d-digital-soldering-station-10143.html Manufacturer's Specs] || 110 || ? || No || Owned by Makerspace Nanaimo <br />
|-<br />
| [[File:Aoyue_852A.jpg|link=Hot Air Rework Station|upright|150px]] || [[Hot Air Rework Station]] || Aoyue 852A++ || 110 || ? || No || Owned by Makerspace Nanaimo <br />
|-<br />
|[[File:Oscilloscope.jpg|link=Oscilloscope|upright|150px]] || [[Oscilloscope]] (QTY:3) <br> (60 MHz, 2 channel) || Tektronix 2215 <br> <br> [http://www.testequipmentdepot.com/usedequipment/tektronix/oscilloscopes/tek2213&2215specs.htm Manufacturer's Specs] || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Rigol_1000Z.png|link=Rigol Digital Oscilloscope|upright|150px]] || [[Rigol Digital Oscilloscope]] <br> (50 MHz, 4 channel) || Rigol DS1054Z<br>[http://beyondmeasure.rigoltech.com/acton/attachment/1579/f-04cf/0/-/-/-/-/file.pdf Manufacturer's Specs] || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1499 member] <br />
|-<br />
|[[File:Function_generator.jpg|link=Function Generator|upright|150px]] || [[Function Generator]] (QTY:2) <br> (3.0 Mhz) || IEC F34 <br> <br> [https://www.radiomuseum.org/r/interstate_f34_function_generator.html Manufacturer's Specs] || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Tougs_M102.jpg|link=Multimeters|upright|70px]] || [[Multimeters]] (QTY:2) || Tougs M102<br> Thsinde TH036-3<br> || 2x 1.5V || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Autotransformer.jpg|link=Autotransformer|upright|150px]] || [[Autotransformer]] <br> 120/140V, 5A, 0.7KVA || Staco 3PN501 <br> <br> (Manufacturer's Specs) || 110/140 || 5A || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:Dual 40 V power supply.jpg|link=Dual 40 V power supply|upright|150px]] || [[Dual 40 V power supply]] (QTY:2) <br> (0-40VDC, 1A, 2 channel) || Lambda LPD-422A-FM <br> <br> (Manufacturer's Specs) || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:YaeTek_8014-B1.jpg|link=Single 30 V power supply|upright|150px]] || [[Single 30 V power supply]]<br> (0-30VDC, 5A, 1 channel) || YaeTek 8014-B1 || 110 || ? || No || Owned by Makerspace Nanaimo<br />
|-<br />
|[[File:StereoZoom_microscope_and_camera_box.jpg|link=StereoZoom microscope|upright|150px]] || [[StereoZoom microscope]]<br> (adjustable 0.7X - 3X w/10X eyepieces<br>for 7X-30X magnification) || Leica StereoZoom || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1499 member]<br />
|-<br />
|}<br />
<br />
== [[:Category:Metal Shop|Metal Shop]] ==<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:Metal_lathe.jpg|link=Metal Lathe|upright|150px]] || [[Metal Lathe]] <br> (1400 RPM, 12" x 36") || Shaoxing CQ6230 <br> (same as Grizzly G4003G) <br> <br> [http://www.grizzly.com/products/12-x-36-Gunsmithing-Lathe-with-Stand/G4003G Manufacturer's Specs] || 220 || ? || Yes || Donated by [http://www.vmacair.com VMAC]<br />
|-<br />
| [[File:Micro_lathe.jpg|link=Micro Lathe|upright|150px]] || [[Micro Lathe]] <br> (7000 RPM, 4.5" x 9.75") || Taig Micro Lathe <br> <br> [http://www.taigtools.com/mlathe.html Manufacturer's Specs] || 110 || ? || Yes || Donated by [https://members.makerspacenanaimo.org/members/view/1286 member]<br />
<br />
<!--<br />
|-<br />
| [[File:Milling_machine.jpg|link=Milling Machine|upright|150px]] || [[Milling Machine]] <br> (0-2500 RPM, 4" x 7-5/16") || Mill/Drill <br> <br> || 110 || ? || Yes || Donated by [https://members.makerspacenanaimo.org/members/view/1249 member]<br />
--><br />
<br />
|-<br />
| [[File:Power_hacksaw.jpg|link=Power Hacksaw|upright|150px]] || [[Power Hacksaw]] <br> (specs) || Jet <br> <br> Manufacturer's Specs || 110 || ? || Yes || ?<br />
|-<br />
| [[File:Metal_bandsaw.jpg|link=Metal Bandsaw|upright|150px]] || [[Metal Bandsaw]] <br> (specs) || Metal Bandsaw <br> <br> Manufacturer's Specs || 110 || ? || Yes || ?<br />
|-<br />
| [[File:Metal_drill_press.jpg|link=Metal Drill Press|upright|150px]] || [[Metal Drill Press]] <br> (specs) || Metal Drill Press <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|-<br />
| [[File:12_ton_shop_press.jpg|link=12 Ton Shop Press|upright|75px]] || [[12 Ton Shop Press]] <br> (specs) || 12 Ton Shop Press <br> <br> || N/A || N/A || No || Donated by [http://www.vmacair.com VMAC]<br />
|-<br />
| [[File:Metal_shear.png|link=Metal Shear|upright|150px]] || [[Metal Shear|Metal Shear, foot squaring]] <br> (51-1/4" cutting length, 16ga MAX.) || Tennsmith T52 <br> <br> [http://www.tennsmith.com/foot-squaring-shears.html Manufacturer's specs] || N/A || N/A || Yes || Long term loan<br />
|-<br />
| [[File:Metal_hand_brake.png|link=Metal Hand Brake|upright|150px]] || [[Metal Hand Brake]] <br> (48-1/4", 16ga MAX.) || Tennsmith U48-16 <br> <br> [http://www.tennsmith.com/bench-top-hand-brakes.html Manufacturer's specs] || N/A || N/A || Yes || Long term loan<br />
|-<br />
| [[File:Metal_notcher.jpg|link=Metal Notcher|upright|150px]] || [[Metal Notcher]] <br> (6" x 6" x 90 degrees, 16ga MAX.) || Roper Whitney PS-66 <br> <br> [https://www.roperwhitney.com/our-products/ps-66-notcher-with-high-speed-blades/ Manufacturer's specs]|| N/A || N/A || Yes || Long term loan<br />
|-<br />
| [[File:Metal_spot_welder.jpg|link=Metal Spot Welder|upright|150px]] || [[Metal Spot Welder]] <br> (45A) || Miller <br> <br> Manufacturer's specs|| N/A || N/A || Yes || Long term loan<br />
|-<br />
|}<br />
<br />
== [[:Category:Software|Software]] ==<br />
* [[List of software]]<br />
<br />
== [[:Category:Wood Shop|Wood Shop]] ==<br />
<br />
{| class="wikitable sortable"<br />
|-<br />
! Picture !!Tool !! Manufacturer/Model !! 110/220 (Volts) !! Power (Amps) !! Training Required !! Donated/Loaned by<br />
|-<br />
| [[File:CNC_Router_Render.png|link=CNC Router|upright|150px]] || [[CNC Router]] <br> (24k RPM, 4'x4'x7") || CNC Conversion Kit 4'x4'x7" <br> <br> [https://web.archive.org/web/20160604062139/http://www.cncconversionkit.com:80/home/218-cnc-router-kit-4-x-4-x-7-.html Manufacturer's Specs] || 110 & 220 || ? || Yes || Owned by Makerspace Nanaimo<br />
|-<br />
| [[File:Table_saw.jpg|link=Table Saw|upright|150px]] || [[Table Saw]] <br> (10", 2.5HP) || King <br> <br> KC-10KX/U50 || 220 || 9.6A || No || Owned by Makerspace Nanaimo<br />
|-<br />
| [[File:Panel_saw.jpg|link=Panel Saw|upright|150px]] || [[Panel Saw]] <br> (4' x 8' crosscut) || DIY || 110 || ? || No || Group Project<br />
|-<br />
| [[File:Bandsaw.jpg|link=Bandsaw|upright|150px]] || [[Bandsaw]] <br> (14") || King <br> <br> King KC-1401HD || 110 || ? || No || ?<br />
|-<br />
| [[File:Thickness_planer.jpg|link=Thickness Planer|upright|150px]] || [[Thickness Planer]] <br> (13" Two-Speed Finishing Planer) || Delta <br> <br> 22-580 || 110 || 15A || No || Donated<br />
|-<br />
| [[File:Miter_saw.jpg|link=Miter Saw|upright|150px]] || [[Miter saw]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1206 member]<br />
|-<br />
| [[File:Router_table.jpg|link=Router Table|upright|150px]] || [[Router Table]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1169 member]<br />
|-<br />
| [[File:Oscillating_spindle_sander.jpg|link=Oscillating Spindle Sander|upright|150px]] || [[Oscillating Spindle Sander]] <br> (specs) || Delta <br> <br> SA350K || 110 || ? || No || ?<br />
|-<br />
| [[File:Combination_sander.png|link=Combination Sander|upright|150px]] || [[Combination Sander]] (Belt & Disc)<br> (4"x36" belt, 6" disc) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|-<br />
| [[File:Wood_lathe.jpg|link=Wood Lathe|upright|150px]] || [[Wood Lathe]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|-<br />
| [[File:Jointer.jpg|link=Jointer|upright|150px]] || [[Jointer]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Donated by [https://members.makerspacenanaimo.org/members/view/1171 member]<br />
|-<br />
| [[File:Drill_press.jpg|link=Drill Press|upright|150px]] || [[Drill Press]] <br> (10", 1/2" chuck) || ? <br> <br> Manufacturer's Specs || 110 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1412 member]<br />
|-<br />
| [[File:Dust_collector.jpg|link=Dust Collector|upright|150px]] || [[Dust Collector]] <br> (specs) || ? <br> <br> Manufacturer's Specs || 220 || ? || No || Loaned by [https://members.makerspacenanaimo.org/members/view/1181 member]<br />
|-<br />
| [[File:Dust_filter.jpg|link=Dust Filter|upright|150px]] || [[Dust Filter]] <br> (specs) || Delta 50-875 <br> <br> Manufacturer's Specs || 110 || ? || No || ?<br />
|}<br />
<br />
[[Category:Nanaimo Makerspace]]<br />
[[Category:Tools]]</div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Milling_Machine&diff=1242Milling Machine2020-10-03T20:19:52Z<p>Jordan: /* **some assembly required** */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Metal Shop]]<br />
=== **off-site for repair/assembly** ===<br />
<br />
== About ==<br />
[[File:Milling_machine.jpg|upright|150px]]<br />
<br />
* Make: '''Power Fist'''<br />
* Model: '''Benchtop Mini Mill/Drill (1/2 HP, dual-speed)''' (aka. Sieg X2, Harbor Freight 44991, Grizzly G8689)<br />
<br />
== Documentation ==<br />
* [https://drive.google.com/file/d/1xXI1oB40_v51NNFjgKOtRD_JyKVN37Af/view?usp=sharing User Manual]<br />
* [https://drive.google.com/file/d/1X4BWuckqTfIoLUe7GvvEstWK5_UOxSbB/view?usp=sharing Parts List]<br />
* [[Metal Shop Reference Material]]<br />
<br />
== Machine Specifications ==<br />
{| border="1" style="border-collapse:collapse" class="mw-collapsible" cellpadding="10"<br />
|+ <br />
!scope="col" | Specifications<br />
|- style="vertical-align:top;"<br />
|-<br />
|Motor: 3/4 HP, 110V, single-phase, 4.5A<br />
|-<br />
|Spindle taper: MT #3<br />
|-<br />
|T-slots: 3 @ 1-1/8" centers, 7/16" wide<br />
|-<br />
|Head travel: 7-1/2"<br />
|-<br />
|Head tilt: 45° L/R<br />
|-<br />
|Max. distance spindle to table: 11-1/2"<br />
|-<br />
|Swing: 12-3/4"<br />
|-<br />
|Table travel (longitudinal): 7-5/16"<br />
|-<br />
|Table travel (cross): 4"<br />
|-<br />
|Table size: 3-5/8" x 15-3/4"<br />
|-<br />
|Range of speeds: 100 to 1,100 RPM (low range), 100 to 2,500 RPM (high range)<br />
|-<br />
|Drawbar thread size: 3/8"x16<br />
|}<br />
<br />
== Accessories ==<br />
<br />
{| class="wikitable"<br />
! colspan="2" | Accessories<br />
|-<br />
|<br />
* Precision Toolmakers Vise<br />
** Jaw Width:2-3/8"<br />
** Jaw Height:1-1/4"<br />
** Jaw Opening:3-3/8"<br />
** Vise Length:7-1/8"<br />
| [[File:milling vise.jpg | 150px]]<br />
<br />
|-<br />
|<br />
* Milling collet chuck (J7316A / MT3)<br />
** 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" collets (J7316A-type)<br />
| [[File:milling collet chuck.jpg | 150px]]<br />
|-<br />
|<br />
* Drill chuck, 1-13mm (1/2"), JT33 / MT3 arbor<br />
| [[File:milling drill chuck.jpg | 150px]]<br />
|-<br />
|<br />
* Clamping Kit, 58 piece, 7/16" table slot<br />
| [[File:milling clamping kit.jpg | 150px]]<br />
|-<br />
|<br />
* Parallels Set, 1/8"thick x 6" long<br />
** 10 pairs; 1/2, 5/8, 3/4, 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8"<br />
| [[File:milling parallels.jpg | 150px]]<br />
|-<br />
|<br />
* 1-2-3 blocks, 2 pieces<br />
| [[File:milling 123 blocks.jpg | 150px]]<br />
|-<br />
|<br />
* Edge and Center Finder<br />
** 0.375" Diameter X 0.200" Length<br />
| [[File:milling edge finder.jpg | 150px]]<br />
|-<br />
|<br />
* Dial Indicator with Magnetic Base<br />
** 0-1" range x 0.001" increments<br />
| [[File:milling dial indicator.jpg | 150px]]<br />
<br />
|}<br />
<br />
== Learning ==<br />
<br />
[http://opensourcemachinetools.org/wordpress/essential-machining-skills-operating-a-milling-machine/ Open Source Machine Tools introduction to milling (4 videos)]<br />
<br />
{{Metal_Shop_Reference_Material}}<br />
<br />
== To-Do ==<br />
*<s>Milling Vise, 3" wide</s><br />
*<s>Clamping kit for 7/16" T-slots</s><br />
*<s>Parallel set</s> <br />
*<s>Edge and center finder</s><br />
*Cutter sets<br />
**Fly cutter<br />
**End mill (2fl,4fl,rougher)<br />
**Counter-sink<br />
**Counter-bore<br />
**Corner-Rounding<br />
**Dovetail<br />
*Spot Drill (120deg)<br />
*<s>Dial indicator and magnetic base</s><br />
*<s>1-2-3 blocks (x2)</s></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Milling_Machine&diff=1241Milling Machine2020-10-01T17:25:43Z<p>Jordan: /* Machine Specifications */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Metal Shop]]<br />
=== **some assembly required** ===<br />
== About ==<br />
[[File:Milling_machine.jpg|upright|150px]]<br />
<br />
* Make: '''Power Fist'''<br />
* Model: '''Benchtop Mini Mill/Drill (1/2 HP, dual-speed)''' (aka. Sieg X2, Harbor Freight 44991, Grizzly G8689)<br />
<br />
== Documentation ==<br />
* [https://drive.google.com/file/d/1xXI1oB40_v51NNFjgKOtRD_JyKVN37Af/view?usp=sharing User Manual]<br />
* [https://drive.google.com/file/d/1X4BWuckqTfIoLUe7GvvEstWK5_UOxSbB/view?usp=sharing Parts List]<br />
* [[Metal Shop Reference Material]]<br />
<br />
== Machine Specifications ==<br />
{| border="1" style="border-collapse:collapse" class="mw-collapsible" cellpadding="10"<br />
|+ <br />
!scope="col" | Specifications<br />
|- style="vertical-align:top;"<br />
|-<br />
|Motor: 3/4 HP, 110V, single-phase, 4.5A<br />
|-<br />
|Spindle taper: MT #3<br />
|-<br />
|T-slots: 3 @ 1-1/8" centers, 7/16" wide<br />
|-<br />
|Head travel: 7-1/2"<br />
|-<br />
|Head tilt: 45° L/R<br />
|-<br />
|Max. distance spindle to table: 11-1/2"<br />
|-<br />
|Swing: 12-3/4"<br />
|-<br />
|Table travel (longitudinal): 7-5/16"<br />
|-<br />
|Table travel (cross): 4"<br />
|-<br />
|Table size: 3-5/8" x 15-3/4"<br />
|-<br />
|Range of speeds: 100 to 1,100 RPM (low range), 100 to 2,500 RPM (high range)<br />
|-<br />
|Drawbar thread size: 3/8"x16<br />
|}<br />
<br />
== Accessories ==<br />
<br />
{| class="wikitable"<br />
! colspan="2" | Accessories<br />
|-<br />
|<br />
* Precision Toolmakers Vise<br />
** Jaw Width:2-3/8"<br />
** Jaw Height:1-1/4"<br />
** Jaw Opening:3-3/8"<br />
** Vise Length:7-1/8"<br />
| [[File:milling vise.jpg | 150px]]<br />
<br />
|-<br />
|<br />
* Milling collet chuck (J7316A / MT3)<br />
** 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" collets (J7316A-type)<br />
| [[File:milling collet chuck.jpg | 150px]]<br />
|-<br />
|<br />
* Drill chuck, 1-13mm (1/2"), JT33 / MT3 arbor<br />
| [[File:milling drill chuck.jpg | 150px]]<br />
|-<br />
|<br />
* Clamping Kit, 58 piece, 7/16" table slot<br />
| [[File:milling clamping kit.jpg | 150px]]<br />
|-<br />
|<br />
* Parallels Set, 1/8"thick x 6" long<br />
** 10 pairs; 1/2, 5/8, 3/4, 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8"<br />
| [[File:milling parallels.jpg | 150px]]<br />
|-<br />
|<br />
* 1-2-3 blocks, 2 pieces<br />
| [[File:milling 123 blocks.jpg | 150px]]<br />
|-<br />
|<br />
* Edge and Center Finder<br />
** 0.375" Diameter X 0.200" Length<br />
| [[File:milling edge finder.jpg | 150px]]<br />
|-<br />
|<br />
* Dial Indicator with Magnetic Base<br />
** 0-1" range x 0.001" increments<br />
| [[File:milling dial indicator.jpg | 150px]]<br />
<br />
|}<br />
<br />
== Learning ==<br />
<br />
[http://opensourcemachinetools.org/wordpress/essential-machining-skills-operating-a-milling-machine/ Open Source Machine Tools introduction to milling (4 videos)]<br />
<br />
{{Metal_Shop_Reference_Material}}<br />
<br />
== To-Do ==<br />
*<s>Milling Vise, 3" wide</s><br />
*<s>Clamping kit for 7/16" T-slots</s><br />
*<s>Parallel set</s> <br />
*<s>Edge and center finder</s><br />
*Cutter sets<br />
**Fly cutter<br />
**End mill (2fl,4fl,rougher)<br />
**Counter-sink<br />
**Counter-bore<br />
**Corner-Rounding<br />
**Dovetail<br />
*Spot Drill (120deg)<br />
*<s>Dial indicator and magnetic base</s><br />
*<s>1-2-3 blocks (x2)</s></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=Milling_Machine&diff=1240Milling Machine2020-10-01T16:38:46Z<p>Jordan: /* Accessories */</p>
<hr />
<div>[[Category:Tools]]<br />
[[Category:Metal Shop]]<br />
=== **some assembly required** ===<br />
== About ==<br />
[[File:Milling_machine.jpg|upright|150px]]<br />
<br />
* Make: '''Power Fist'''<br />
* Model: '''Benchtop Mini Mill/Drill (1/2 HP, dual-speed)''' (aka. Sieg X2, Harbor Freight 44991, Grizzly G8689)<br />
<br />
== Documentation ==<br />
* [https://drive.google.com/file/d/1xXI1oB40_v51NNFjgKOtRD_JyKVN37Af/view?usp=sharing User Manual]<br />
* [https://drive.google.com/file/d/1X4BWuckqTfIoLUe7GvvEstWK5_UOxSbB/view?usp=sharing Parts List]<br />
* [[Metal Shop Reference Material]]<br />
<br />
== Machine Specifications ==<br />
{| border="1" style="border-collapse:collapse" class="mw-collapsible" cellpadding="10"<br />
|+ <br />
!scope="col" | Specifications<br />
|- style="vertical-align:top;"<br />
|-<br />
|Motor: 3/4 HP, 110V, single-phase, 4.5A<br />
|-<br />
|Spindle taper: MT #3<br />
|-<br />
|T-slots: 3 @ 1-1/8" centers, 7/16" wide<br />
|-<br />
|Head travel: 7-1/2"<br />
|-<br />
|Head tilt: 45° L/R<br />
|-<br />
|Max. distance spindle to table: 11-1/2"<br />
|-<br />
|Swing: 12-3/4"<br />
|-<br />
|Table travel (longitudinal): 7-5/16"<br />
|-<br />
|Table travel (cross): 4"<br />
|-<br />
|Table size: 3-5/8" x 15-3/4"<br />
|-<br />
|Range of speeds: 100 to 1,100 RPM (low range), 100 to 2,500 RPM (high range)<br />
|-<br />
|Drawbar thread size: M12-1.75<br />
|}<br />
<br />
== Accessories ==<br />
<br />
{| class="wikitable"<br />
! colspan="2" | Accessories<br />
|-<br />
|<br />
* Precision Toolmakers Vise<br />
** Jaw Width:2-3/8"<br />
** Jaw Height:1-1/4"<br />
** Jaw Opening:3-3/8"<br />
** Vise Length:7-1/8"<br />
| [[File:milling vise.jpg | 150px]]<br />
<br />
|-<br />
|<br />
* Milling collet chuck (J7316A / MT3)<br />
** 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" collets (J7316A-type)<br />
| [[File:milling collet chuck.jpg | 150px]]<br />
|-<br />
|<br />
* Drill chuck, 1-13mm (1/2"), JT33 / MT3 arbor<br />
| [[File:milling drill chuck.jpg | 150px]]<br />
|-<br />
|<br />
* Clamping Kit, 58 piece, 7/16" table slot<br />
| [[File:milling clamping kit.jpg | 150px]]<br />
|-<br />
|<br />
* Parallels Set, 1/8"thick x 6" long<br />
** 10 pairs; 1/2, 5/8, 3/4, 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8"<br />
| [[File:milling parallels.jpg | 150px]]<br />
|-<br />
|<br />
* 1-2-3 blocks, 2 pieces<br />
| [[File:milling 123 blocks.jpg | 150px]]<br />
|-<br />
|<br />
* Edge and Center Finder<br />
** 0.375" Diameter X 0.200" Length<br />
| [[File:milling edge finder.jpg | 150px]]<br />
|-<br />
|<br />
* Dial Indicator with Magnetic Base<br />
** 0-1" range x 0.001" increments<br />
| [[File:milling dial indicator.jpg | 150px]]<br />
<br />
|}<br />
<br />
== Learning ==<br />
<br />
[http://opensourcemachinetools.org/wordpress/essential-machining-skills-operating-a-milling-machine/ Open Source Machine Tools introduction to milling (4 videos)]<br />
<br />
{{Metal_Shop_Reference_Material}}<br />
<br />
== To-Do ==<br />
*<s>Milling Vise, 3" wide</s><br />
*<s>Clamping kit for 7/16" T-slots</s><br />
*<s>Parallel set</s> <br />
*<s>Edge and center finder</s><br />
*Cutter sets<br />
**Fly cutter<br />
**End mill (2fl,4fl,rougher)<br />
**Counter-sink<br />
**Counter-bore<br />
**Corner-Rounding<br />
**Dovetail<br />
*Spot Drill (120deg)<br />
*<s>Dial indicator and magnetic base</s><br />
*<s>1-2-3 blocks (x2)</s></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=File:Milling_dial_indicator.jpg&diff=1239File:Milling dial indicator.jpg2020-10-01T16:30:05Z<p>Jordan: </p>
<hr />
<div></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=File:Milling_123_blocks.jpg&diff=1238File:Milling 123 blocks.jpg2020-10-01T16:26:23Z<p>Jordan: </p>
<hr />
<div></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=File:Milling_parallels.jpg&diff=1237File:Milling parallels.jpg2020-10-01T16:24:31Z<p>Jordan: </p>
<hr />
<div></div>Jordanhttp://wiki.makerspacenanaimo.org/index.php?title=File:Milling_edge_finder.jpg&diff=1236File:Milling edge finder.jpg2020-10-01T16:19:29Z<p>Jordan: Jordan uploaded a new version of File:Milling edge finder.jpg</p>
<hr />
<div></div>Jordan