CNC Router

Overview

Work area dimensions
- Z-axis travel 7"
- X-axis travel 48"
- Y-axis travel 48"
4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.
6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z.
1 x Set of nuts, bolts and washers.
Aluminum parts
- Thickness 1/2 inches and 3/4 inches
Aluminum extrusion 60mm x 60mm, 30-series slots
- X axis bridge 2x6060 mm (2.36" x 2.36")
- Y axis Frame 6060 mm (2.36" x 2.36")
SPINDLE
- 24,000RPM (currently set to 12,000RPM)
- ER11 collets
- 1.5KW Water-cooled Spindle motor + VFD
- Diameter: 80 mm x Length: 205 mm
- Power: 1.5 KW Voltage: 220V
- Water pump for spindle
CNC Driver Controller
- 4 x Digital Stepper driver: CCK5560 24V to 50V (manual, wiring details)
- 1 x Power supply: 600W 48V 12A
- 1 x C10 breakout board (link)
Stepper Motor
- Jinsanshi Motor 57HS112-3004A635-A24 [1]
- 4 x Stepper Motor 425 oz. In.
- 1.8° /200 Steps Per Rev.
- 3 Amps Current Per Phase
- 4-wire Bi-polar
- 1/4" shaft
Couplers
- 6.35mm (1/4") x 8mm, D25L30 helical
Limit Switches
- NPN DC 6-36V Inductive Proximity Sensor Detection Switch
Speed 40000mm/minute
The weight of Cnc router 300 pounds " 150kg "

E-stop switch failed; unreliable contacts
- 2018/09/02 - replaced with premium Sprecher & Schuh
X-axis stepper coupler failed
- 2018/09/12 - replaced with similar spiral wound-style as temporary; ordered lovejoy-style
Z-axis found slipping/losing position
- 2019/03/xx - replaced Z-axis stepper motor coupler with lovejoy-style
2019/05/xx - X-- & X++ limit switches moved outboard
- collision possible between gantry riser brackets and z-axis now --REQUIRES RESOLUTION
2019/08/xx - X-axis coupler found spinning on ballscrew end
- one set screw found missing, re-tightened remaining set screw
2019/09/10 - B-axis (Y-axis slave) home proximity sensor found damaged, homing procedure not functional
- 2019/09/14 - replaced proximity sensor [2]

(this is a list of users that have been signed-off on using the machine)