CNC Router Hardware

From Makerspace Nanaimo
Revision as of 17:25, 21 January 2021 by Jordan (talk | contribs)
Jump to navigation Jump to search

Details of the hardware used in our CNC Router

  • 4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.
  • 6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z.
  • 1 x Set of nuts, bolts and washers.
  • Aluminum parts
    • Thickness 1/2 inches and 3/4 inches
  • Aluminum extrusion 60mm x 60mm, 30-series slots
    • X axis bridge 2x6060 mm (2.36" x 2.36")
    • Y axis Frame 6060 mm (2.36" x 2.36")
  • SPINDLE
  • CNC Driver Controller
    • 4 x Digital Stepper driver: CCK5560 24V to 50V (manual, wiring details)
    • 1 x Power supply: 600W 48V 12A
    • 1 x C10 breakout board (link)
  • Stepper Motor
    • Jinsanshi Motor 57HS112-3004A635-A24 [1]
    • 4 x Stepper Motor 425 oz. In.
    • 1.8° /200 Steps Per Rev.
    • 3 Amps Current Per Phase
    • 4-wire Bi-polar
    • 1/4" shaft
  • Couplers
    • 6.35mm (1/4") x 8mm, D25L30 helical
  • Limit Switches
  • Speed 4000mm/minute
  • The weight of Cnc router 300 pounds " 150kg "