CNC Router Hardware
Jump to navigation
Jump to search
Details of the hardware used in our CNC Router
- 4 x High-precision C7 ball screw Q16mm pitch 5mm (C7). 8mm diameter coupling end.
- 6 x 25mm Precision Linear Rail Guideway with 12 V bearing blocks for Y X and Z.
- 1 x Set of nuts, bolts and washers.
- Aluminum parts
- Thickness 1/2 inches and 3/4 inches
- Aluminum extrusion 60mm x 60mm, 30-series slots
- X axis bridge 2x6060 mm (2.36" x 2.36")
- Y axis Frame 6060 mm (2.36" x 2.36")
- SPINDLE
- 24,000RPM (currently set to 12,000RPM)
- ER11 collets
- 1.5KW Water-cooled Spindle motor + VFD
- Diameter: 80 mm x Length: 205 mm
- Power: 1.5 KW Voltage: 220V
- Water pump for spindle
- CNC Driver Controller
- 4 x Digital Stepper driver: CCK5560 24V to 50V (manual, wiring details)
- 1 x Power supply: 600W 48V 12A
- 1 x C10 breakout board (link)
- Stepper Motor
- Jinsanshi Motor 57HS112-3004A635-A24 [1]
- 4 x Stepper Motor 425 oz. In.
- 1.8° /200 Steps Per Rev.
- 3 Amps Current Per Phase
- 4-wire Bi-polar
- 1/4" shaft
- Couplers
- 6.35mm (1/4") x 8mm, D25L30 helical
- Limit Switches
- Speed 4000mm/minute
- The weight of Cnc router 300 pounds " 150kg "