Difference between revisions of "Greensand Casting"
Jump to navigation
Jump to search
Line 7: | Line 7: | ||
This is a picture of my first casting, just out of the sand. | This is a picture of my first casting, just out of the sand. | ||
+ | [[File:Sandcast_005sm.jpg]] | ||
+ | Here is the flask ( cope and drag) that will hold the sand which forms the cavity mould. | ||
[[File:Sandcast011sm.jpg]] | [[File:Sandcast011sm.jpg]] |
Revision as of 00:05, 14 December 2017
This is a picture of my first casting, just out of the sand.
Here is the flask ( cope and drag) that will hold the sand which forms the cavity mould.
This is the pattern in the cope, ready to be extracted.
The pattern has been removed, and cavities made for the sprue and riser. ( Where the metal is poured in.) The white powder is talc (Baby powder ) used as a mould release.
Here is the drag, packed with sand and the patters for sprue and riser still to come out.
This is the flask assembled, with lead weights on top to keep the drag from floating on the liquid aluminium. The small pellet on top is a foil packet of pool chlorine powder that will be used to degas the molten metal before the pour.