Milling Machine
Jump to navigation
Jump to search
**some assembly required**
About
- Make: Power Fist
- Model: Benchtop Mini Mill/Drill (1/2 HP, dual-speed) (aka. Sieg X2, Harbor Freight 44991, Grizzly G8689)
Documentation
Machine Specifications
Specifications |
---|
Motor: 3/4 HP, 110V, single-phase, 4.5A |
Spindle taper: MT #3 |
T-slots: 3 @ 1-1/8" centers, 7/16" wide |
Head travel: 7-1/2" |
Head tilt: 45° L/R |
Max. distance spindle to table: 11-1/2" |
Swing: 12-3/4" |
Table travel (longitudinal): 7-5/16" |
Table travel (cross): 4" |
Table size: 3-5/8" x 15-3/4" |
Range of speeds: 100 to 1,100 RPM (low range), 100 to 2,500 RPM (high range) |
Drawbar thread size: M12-1.75 |
Accessories
Learning
Open Source Machine Tools introduction to milling (4 videos)
Metal Shop Vendors
Raw Materials | Hardware | Tooling & Accessories |
---|---|---|
|
|
Youtube Channels
- Clough42
- Quinn Dunkle
- Inheritance Machining
- Adam Booth
- BasementShopGuy
- Clickspring
- Dan Gelbart
- Donald R. Cossitt
- Doubleboost
- Grimsmo Knives
- Halligan142
- Herb Blair
- Hossmachine
- James Kilroy
- Keith Fenner - Turn Wright Machine Works
- Keith Rucker - Vintage Machinery
- Myfordboy
- NYC CNC
- Pierre's Garage
- Randy Richard
- Ray Caniglia
- RussStuff
- Stefan Gotteswinter
- Stevewatr
- SV Seeker
- Tactical Keychains
- ThatLazyMachinist - Marc L'Ecuyer
- ThatToolandDieGuy
- The Cube Studio
- Tom Lipton - Ox Tools
- Tom's Techniques
- Tormach, LLC
- Tubalcain
- War Machine, LLC
- Xynudu
Books
- Build Your Own Metal Working Shop From Scrap - Dave Gingery
- Machine Shop Trade Secrets - James A. Harvey
- Metalworking Sink or Swim - Tom Lipton
- The Home Machinist's Handbook - Doug Briney
- Machinery's Handbook - Industrial Press
- Tabletop Machining - Joe Martin
- CNC Programming Handbook - Peter Smid
- Jig and Fixture Handbook - Carr Lane Manufacturing Ltd.
To-Do
Milling Vise, 3" wideClamping kit for 7/16" T-slotsParallel setEdge and center finder- Cutter sets
- Fly cutter
- End mill (2fl,4fl,rougher)
- Counter-sink
- Counter-bore
- Corner-Rounding
- Dovetail
- Spot Drill (120deg)
Dial indicator and magnetic base1-2-3 blocks (x2)