Milling Machine

About

Make: Power Fist
Model: Benchtop Mini Mill/Drill (1/2 HP, dual-speed) (aka. Sieg X2, Harbor Freight 44991, Grizzly G8689)


Specifications
Motor: 3/4 HP, 110V, single-phase, 4.5A
Spindle taper: MT #3
T-slots: 3 @ 1-1/8" centers, 7/16" wide
Head travel: 7-1/2"
Head tilt: 45° L/R
Max. distance spindle to table: 11-1/2"
Swing: 12-3/4"
Table travel (longitudinal): 7-5/16"
Table travel (cross): 4"
Table size: 3-5/8" x 15-3/4"
Range of speeds: 100 to 1,100 RPM (low range), 100 to 2,500 RPM (high range)
Drawbar thread size: 3/8"x16

Accessories
Precision Toolmakers Vise Jaw Width：2-3/8" Jaw Height：1-1/4" Jaw Opening：3-3/8" Vise Length：7-1/8"
Milling collet chuck (J7316A / MT3) 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" collets (J7316A-type)
Drill chuck, 1-13mm (1/2"), JT33 / MT3 arbor
Clamping Kit, 58 piece, 7/16" table slot
Parallels Set, 1/8"thick x 6" long 10 pairs; 1/2, 5/8, 3/4, 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8"
1-2-3 blocks, 2 pieces
Edge and Center Finder 0.375" Diameter X 0.200" Length
Dial Indicator with Magnetic Base 0-1" range x 0.001" increments


Raw Materials	Hardware	Tooling & Accessories
Metal Supermarket Directions Industrial Plastics & Paint Directions A J Forsyth Directions Demxx Directions	Raider Hansen Directions State you are with Makerspace Nanaimo for discounts. Home Hardware Directions Home Depot Directions Lowes Directions New Line Hose & Fitting Directions Fastenal Directions	https://www.busybeetools.com/ (Vancouver) https://www.kbctools.ca/ (Vancouver) https://www.kmstools.com/ (Now in Nanaimo) https://www.accusizetools.com/ (Toronto) http://www.shars.com/ (USA) https://littlemachineshop.com/ (USA) https://www.mscdirect.com/ (USA)