Uncategorized files
Jump to navigation
Jump to search
Showing below up to 285 results in range #1 to #285.
View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)
- 12 ton shop press.jpg 1,050 × 2,000; 194 KB
- 14BX Manual 021122.pdf ; 3.13 MB
- 19-38-Manual-ENG-For-Web-20170310-1.pdf ; 1.71 MB
- 2018-04-21 copper boards at makerspace.jpg 4,032 × 3,024; 2.02 MB
- 2018-05-02 AccurateCNC PCB KIM Uno side1.jpg 3,024 × 4,032; 2.69 MB
- 2018-05-02 AccurateCNC PCB KIM Uno side2.jpg 3,024 × 4,032; 2.9 MB
- 2019-01-11 Chiller and rotary axis.jpg 4,032 × 3,024; 2.25 MB
- 2019-01-11 Exhaust fan.jpg 4,032 × 3,024; 1.79 MB
- 2019-01-11 Laser cutter accessories.jpg 4,032 × 3,024; 2.56 MB
- 2019-01-11 Laser cutter and accessories.jpg 4,032 × 3,024; 2.49 MB
- 2019-01-11 Laser cutter back.jpg 4,032 × 3,024; 1.74 MB
- 2019-01-11 Laser cutter back panel.jpg 4,032 × 3,024; 1.6 MB
- 2019-01-11 Laser cutter front label.jpg 3,024 × 4,032; 2.19 MB
- 2019-01-11 Laser tube Reci 90W.jpg 4,032 × 3,024; 1.95 MB
- 2019-01-11 Laser tube label.jpg 4,032 × 3,024; 1.66 MB
- 2019-01-18 16.56.21 soldering area.jpg 4,032 × 3,024; 2.35 MB
- 2019-01-18 17.01.29 metal shop table.jpg 4,032 × 3,024; 2.09 MB
- 2019-01-19 00.21.16 makerspace logo plywood.jpg 4,032 × 3,024; 2.86 MB
- 2019-01-19 00.21.28 makerspace logo plywood.jpg 4,032 × 3,024; 3.71 MB
- 2019-01-19 13.48.23 front room during maketime.jpg 4,032 × 3,024; 2.23 MB
- 2019-01-19 20.56.08 makerspace logo plywood.jpg 4,032 × 3,024; 2.54 MB
- 2019-01-28 18.05.55 oak quarterinch powerlevels.jpg 4,032 × 3,024; 3.18 MB
- 2019-01-30 04.09.02 LASER PC case.jpg 1,280 × 960; 150 KB
- 2019-01-30 21.31.06 Marvel Calendar.jpg 4,032 × 3,024; 2.98 MB
- 2019-01-30 21.54.28 ceramic tile1.jpg 4,032 × 3,024; 2.27 MB
- 2019-01-30 22.58.30 ceramic tile2.jpg 4,032 × 3,024; 3.76 MB
- 2019-01-31 00.01.52 mirror back1.jpg 4,032 × 3,024; 2.62 MB
- 2019-01-31 00.20.03 glass mirror frontside1.jpg 4,032 × 3,024; 2.17 MB
- 2019-01-31 00.25.36 mirror backside etched backlit.jpg 4,032 × 3,024; 2.74 MB
- 2019-02-02 23.44.47 cardboard car parts.jpg 4,032 × 3,024; 3.81 MB
- 2019-02-03 00.42.23 racing car corrugated cardboard.jpg 4,032 × 3,024; 2.52 MB
- 2019-02-07 00.35.44 nanaimo map.jpg 3,024 × 4,032; 3.75 MB
- 2019-02-07 13.06.38.jpg 640 × 1,136; 157 KB
- 2019-03-20 21.43.54 living hinge binder.jpg 4,032 × 3,024; 2.6 MB
- 2610051825 1617 0518.pdf ; 2.09 MB
- 3DserverCURA-start.PNG 45 × 33; 2 KB
- 3DserverCapture1.PNG 996 × 578; 63 KB
- 3DserverCapture3.PNG 242 × 54; 2 KB
- 3DserverCapture4.PNG 491 × 116; 10 KB
- 3DserverCapture5.PNG 1,006 × 653; 90 KB
- 3DserverCapture6.PNG 976 × 636; 100 KB
- 3DserverCapture7.PNG 1,151 × 798; 106 KB
- 3DserverCapture8.PNG 504 × 817; 29 KB
- 58-14-5617d5.pdf ; 2.97 MB
- 6060extrusion.jpg 218 × 232; 8 KB
- 83705 manual-eng.pdf ; 3.28 MB
- A350 contact pad.jpg 2,016 × 1,512; 1,005 KB
- A350 contact pad Z lit.jpg 2,016 × 1,512; 925 KB
- A350 contact pad Z not lit.jpg 2,016 × 1,512; 689 KB
- A350 depth limiter.jpg 1,331 × 998; 436 KB
- A350 tool change.jpg 2,016 × 1,512; 842 KB
- Adafruit logo.png 384 × 131; 4 KB
- Amazonbasics Desktop Mini Microphone 20200525.jpg 1,280 × 960; 135 KB
- Aoyue 852A.jpg 1,000 × 1,000; 75 KB
- Autotransformer.jpg 1,442 × 1,243; 172 KB
- BC robotics logo.png 228 × 43; 8 KB
- Bandsaw.jpg 600 × 600; 17 KB
- Bathroom Cleaning Log.pdf ; 42 KB
- Bearing.jpg 636 × 424; 84 KB
- Bobby2-apart.jpg 3,264 × 2,448; 1.54 MB
- Brother DCP7060D.jpg 653 × 519; 52 KB
- Bylaws2018.pdf ; 58 KB
- Bylaws2018final-2ED.pdf ; 59 KB
- Bylaws2018final-ED.pdf ; 59 KB
- Bylaws2018final.pdf ; 58 KB
- CCCU logo.gif 500 × 75; 15 KB
- CNC Router Render.png 984 × 684; 133 KB
- CNC Test Domino Simulation.jpg 2,019 × 1,311; 294 KB
- Capture2.PNG 647 × 579; 34 KB
- Cassette PLEASE for the KIM-1.jpg 3,840 × 2,160; 2.1 MB
- Casting etc 004sm.jpg 509 × 340; 108 KB
- Cncrouter1.jpg 4,032 × 3,024; 1.85 MB
- Combination sander.png 800 × 420; 298 KB
- DB12 6 -Disc-Sander-Manual.pdf ; 2.13 MB
- Digikey logo.png 1,645 × 596; 270 KB
- Drill press.jpg 800 × 800; 141 KB
- DrumGritsSelection.PNG 690 × 294; 60 KB
- Dual 40 V power supply.jpg 640 × 497; 36 KB
- Dust collector.jpg 822 × 1,500; 485 KB
- Dust filter.jpg 1,000 × 1,000; 51 KB
- EMC215.png 300 × 384; 202 KB
- ESAB-0558102553 LRG.jpg 700 × 700; 37 KB
- ETI Collet Sales Order.pdf ; 34 KB
- Electronics Workbench 20180712.jpg 4,032 × 3,024; 2.51 MB
- Electronics Workbench 20190221.jpg 4,032 × 3,024; 2.5 MB
- Electronics wire cutters.jpg 1,426 × 1,901; 497 KB
- Elekmaker Drawbot.jpg 800 × 800; 31 KB
- Elgato HD60S at makerspace 20200525.jpg 1,280 × 960; 208 KB
- Front desk with tags March 2019.jpg 4,032 × 3,024; 2.52 MB
- Function generator.jpg 564 × 373; 33 KB
- Gear.jpg 636 × 424; 59 KB
- HHrouterCase.png 300 × 217; 97 KB
- HHrouterInCase.png 300 × 199; 120 KB
- HP DesignJet 600.jpg 540 × 530; 43 KB
- HP Elitebook 8460p at makerspace 20200525.jpg 1,280 × 960; 159 KB
- Hammer1.jpg 3,203 × 2,480; 622 KB
- Hammer2.jpg 3,207 × 2,480; 716 KB
- IMG 20171202 123559res.png 653 × 490; 520 KB
- IPad at makerspace 20200525.jpg 1,280 × 960; 161 KB
- Industrial sewing machine1.jpg 1,280 × 960; 206 KB
- Industrial sewing machine2.jpg 1,280 × 960; 176 KB
- Interior electronics logo.png 431 × 78; 11 KB
- Intraworks logo.png 300 × 134; 20 KB
- Jointer.jpg 259 × 194; 7 KB
- KC-20VS-2.jpg 900 × 984; 317 KB
- KC-20VS-2 manual-eng.pdf ; 888 KB
- KC-20VS-2 service manual.pdf ; 685 KB
- KIM1-CassettePulseTrain.png 761 × 462; 14 KB
- LabelWriter 400.jpg 490 × 500; 47 KB
- Laser Cutter Training slideshow.pdf ; 1.18 MB
- Laser Tube Power Supply.jpg 1,280 × 960; 135 KB
- Laser auto focus.jpg 958 × 932; 139 KB
- Laser button esc.jpg 849 × 566; 61 KB
- Laser button file.jpg 849 × 566; 61 KB
- Laser button frame.jpg 849 × 566; 61 KB
- Laser button origin.jpg 849 × 566; 61 KB
- Laser button start.jpg 849 × 566; 61 KB
- Laser button udlr.jpg 849 × 566; 62 KB
- Laser chiller maint manual.pdf ; 1.52 MB
- Laser chiller manual.pdf ; 391 KB
- Laser controller.jpg 960 × 1,280; 174 KB
- Laser cut stamp rubber side.jpg 4,032 × 3,024; 1.93 MB
- Laser cut stamp wood side.jpg 4,032 × 3,024; 1.9 MB
- Laser cutter acrylic samples.jpg 1,000 × 739; 153 KB
- Laser cutter on pallet.jpg 4,032 × 3,024; 2.02 MB
- Laser cutter on table - Jan 2019.jpg 2,840 × 2,608; 1.1 MB
- Laser cutter plywood samples.jpg 1,000 × 800; 503 KB
- Laser cutter samples.jpg 750 × 800; 339 KB
- Laser cutter samples 2.jpg 750 × 560; 170 KB
- Error creating thumbnail: File with dimensions greater than 12.5 MPLaser cutter wiring diagram.jpg 4,958 × 6,458; 1.62 MB
- Laser dino1.jpg 1,024 × 768; 184 KB
- Laser dino2.jpg 1,024 × 768; 200 KB
- Laser dino3.jpg 1,024 × 768; 216 KB
- Laser dino4.jpg 1,024 × 768; 245 KB
- Laser enter.jpg 849 × 566; 61 KB
- Laser estop.jpg 850 × 608; 121 KB
- Laser file.jpg 2,048 × 1,327; 344 KB
- Laser materials chart.jpg 600 × 600; 110 KB
- Laser menu z move.jpg 958 × 932; 139 KB
- Laser mirror replacement1a.jpg 1,000 × 750; 147 KB
- Laser mirror replacement1b.jpg 1,280 × 960; 338 KB
- Laser optics order 20200225.jpg 532 × 457; 44 KB
- Laser rubber stamp.jpg 2,000 × 1,000; 167 KB
- Laser stepper driver.jpg 4,032 × 3,024; 2.16 MB
- Laser switch.jpg 850 × 608; 121 KB
- Laser up down.jpg 849 × 566; 61 KB
- Laser z stepper driver.jpg 4,032 × 3,024; 1.71 MB
- Laser zu.jpg 849 × 566; 64 KB
- Lathe switch1.jpg 768 × 1,024; 310 KB
- Lathe switch2.jpg 768 × 1,024; 218 KB
- Lathe switch3.jpg 768 × 1,024; 189 KB
- Lathe switch4.jpg 768 × 1,024; 179 KB
- MGN rail specs.jpg 998 × 750; 186 KB
- MI-93300M.pdf ; 2.6 MB
- MI-93300 LRG.jpg 700 × 700; 41 KB
- Main page feature pic.jpg 1,280 × 848; 151 KB
- MakerspaceDemo.pdf ; 71 KB
- Makerspace Building Exterior.jpg 856 × 642; 115 KB
- Makerspace Nanaimo Floorplan.png 1,099 × 849; 31 KB
- Makerspace Nanaimo Logo.png 135 × 135; 25 KB
- Maketime.jpg 672 × 365; 35 KB
- Manual A3-26 A3-31 A3-41 compress2.pdf ; 7.08 MB
- Metal bandsaw.jpg 500 × 500; 15 KB
- Metal drill press.jpg 1,000 × 1,000; 61 KB
- Metal hand brake.png 392 × 378; 123 KB
- Metal hand brake manual.pdf ; 2.38 MB
- Metal lathe.jpg 1,000 × 1,000; 81 KB
- Metal notcher.jpg 570 × 570; 16 KB
- Metal notcher manual.pdf ; 157 KB
- Metal notcher manual older.pdf ; 188 KB
- Metal shear.png 392 × 280; 111 KB
- Metal shear data plate.jpg 4,032 × 3,024; 1.99 MB
- Metal shear manual.pdf ; 1.03 MB
- Micro lathe.jpg 400 × 300; 14 KB
- Milling 123 blocks.jpg 1,263 × 960; 74 KB
- Milling clamping kit.jpg 1,166 × 915; 59 KB
- Milling collet chuck.jpg 1,200 × 1,200; 91 KB
- Milling dial indicator.jpg 380 × 481; 13 KB
- Milling drill chuck.jpg 800 × 800; 63 KB
- Milling edge finder.jpg 1,500 × 405; 39 KB
- Milling machine.jpg 1,200 × 1,200; 143 KB
- Milling parallels.jpg 500 × 379; 36 KB
- Milling vise.jpg 500 × 218; 14 KB
- Miter saw.jpg 1,000 × 1,000; 110 KB
- Motormount.jpg 636 × 424; 103 KB
- Mount.jpg 636 × 424; 126 KB
- Mouser logo.jpg 950 × 386; 31 KB
- NRC hobby shop logo.jpg 630 × 240; 46 KB
- New Bandsaw.png 300 × 530; 110 KB
- New ComboSander.png 300 × 416; 82 KB
- New DrillPress.png 295 × 895; 101 KB
- New Drum-Sander.png 300 × 394; 100 KB
- New HH-router.png 283 × 316; 19 KB
- New Jointer-Planer.png 300 × 203; 42 KB
- New Lathe.png 300 × 231; 46 KB
- New table-router.png 300 × 300; 93 KB
- Newark logo.png 574 × 103; 54 KB
- Oscillating spindle sander.jpg 450 × 450; 31 KB
- Oscilloscope.jpg 1,000 × 750; 355 KB
- PCB Engraving Machine.png 853 × 914; 1.22 MB
- PCB Spindle Assembly.JPG 711 × 747; 52 KB
- PLD Designs logo.png 125 × 26; 576 bytes
- Paypaldonatebutton.gif 147 × 47; 3 KB
- Photo 2019-01-19 09-59-18 makerspace logos plywood.jpg 1,280 × 960; 157 KB
- Pipemount 001sm.jpg 636 × 424; 83 KB
- Planer depth of cut.jpg 426 × 306; 26 KB
- Powder printer.jpg 2,048 × 1,536; 629 KB
- Power hacksaw.jpg 1,280 × 720; 192 KB
- Precisebits logo.png 541 × 95; 54 KB
- PrintrbotSimpleMetal-Black.jpg 1,080 × 1,080; 42 KB
- RBEngineering logo.png 399 × 84; 10 KB
- Rd1.jpg 484 × 405; 43 KB
- Rd2.jpg 501 × 381; 44 KB
- Rdworks current position.jpg 288 × 183; 24 KB
- Rdworks download.jpg 502 × 430; 41 KB
- Rdworks go scale.jpg 288 × 183; 24 KB
- Rdworks origin.jpg 1,341 × 856; 149 KB
- Rdworks start.jpg 288 × 183; 23 KB
- Rdworks stop.jpg 288 × 183; 23 KB
- Reci 100W Laser Engrave Machine eBay.jpg 800 × 800; 116 KB
- Reflow oven.jpg 400 × 300; 21 KB
- Rigol 1000Z.png 500 × 313; 225 KB
- Rotary pic1.jpg 797 × 599; 133 KB
- Rotary pic2.jpg 717 × 539; 79 KB
- Rotary pic3.jpg 288 × 383; 32 KB
- Rotary pic4.jpg 397 × 695; 95 KB
- Router table.jpg 800 × 420; 48 KB
- Sandcast011sm.jpg 636 × 424; 132 KB
- Sandcast 005sm.jpg 636 × 424; 112 KB
- Sandcast 006sm.jpg 636 × 424; 85 KB
- Sandcast 012sm.jpg 636 × 424; 128 KB
- Sandcast 014sm.jpg 636 × 424; 138 KB
- Sandcast 017sm.jpg 636 × 424; 132 KB
- Sandcast 019sm.jpg 636 × 424; 162 KB
- Sandcast 021sm.jpg 636 × 424; 97 KB
- SawStop.jpg 627 × 424; 33 KB
- SawStop label.jpg 4,032 × 3,024; 1.87 MB
- Setup1.jpg 636 × 424; 104 KB
- Setup2.jpg 636 × 424; 91 KB
- SilhouetteCameo2.jpg 1,000 × 1,000; 52 KB
- Soldering iron.jpg 800 × 600; 42 KB
- Sparkfun logo.jpg 2,400 × 1,500; 146 KB
- Staticmap.png 640 × 400; 21 KB
- StereoZoom Arduino smd components max zoom.jpg 2,048 × 1,536; 1.74 MB
- StereoZoom Arduino smd components min zoom.jpg 2,048 × 1,536; 1.85 MB
- StereoZoom IC decapped max zoom.jpg 2,048 × 1,536; 1.77 MB
- StereoZoom IC decapped min zoom.jpg 2,048 × 1,536; 1.16 MB
- StereoZoom Iphone screen max zoom.jpg 2,048 × 1,536; 1.39 MB
- StereoZoom Iphone screen min zoom.jpg 2,048 × 1,536; 1.63 MB
- StereoZoom Makerspace business card high zoom.jpg 2,048 × 1,536; 1.81 MB
- StereoZoom Makerspace business card low zoom.jpg 2,048 × 1,536; 1.14 MB
- StereoZoom Micrometer 1mm at max zoom.jpg 2,048 × 1,536; 1.54 MB
- StereoZoom Quarter head max zoom.jpg 2,048 × 1,536; 852 KB
- StereoZoom Quarter head min zoom.jpg 2,048 × 1,536; 960 KB
- StereoZoom Router bit 0625 inch max zoom.jpg 2,048 × 1,536; 1.39 MB
- StereoZoom Router bit 0625 inch min zoom.jpg 2,048 × 1,536; 1.48 MB
- StereoZoom Ruler at min zoom.jpg 2,048 × 1,536; 1.89 MB
- StereoZoom microscope and camera box.jpg 3,488 × 2,504; 1.46 MB
- TONES, FF, DAN OLIVER MAKES MUSIC WITH KIM COMPUTER - side 1.jpg 3,840 × 2,160; 3.43 MB
- Table router.jpg 900 × 900; 296 KB
- Table saw.jpg 381 × 273; 21 KB
- Table saw 2.jpg 2,853 × 1,927; 1.38 MB
- Test Domino.png 2,570 × 3,132; 542 KB
- Test mill pcb 20180411 1200dpi.jpg 927 × 761; 143 KB
- Test mill pcb screenshot.png 1,614 × 892; 56 KB
- Th.jpg 474 × 327; 22 KB
- Thickness planer.jpg 400 × 400; 21 KB
- Thsinde TH036-3.jpg 1,500 × 1,500; 204 KB
- Tools available for AccurateCNC 350.jpg 816 × 1,056; 253 KB
- Tougs M102.jpg 677 × 1,377; 99 KB
- TrackSaw.jpg 300 × 225; 61 KB
- Tube-tester213 215.pdf ; 1.11 MB
- Vcarve-how-it-works.png 800 × 553; 141 KB
- Vectric activation screenshot.jpg 800 × 1,035; 149 KB
- Vending machine.jpg 960 × 1,280; 159 KB
- Vfd cxn diag.jpg 1,001 × 1,001; 119 KB
- Wall colour clock.png 547 × 414; 17 KB
- Wood lathe.jpg 600 × 563; 37 KB
- YaeTek 8014-B1.jpg 1,500 × 1,500; 345 KB